We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton 1-1/2 HP open drip proof motor with rigid base

Dayton

Dayton 6K630 1-1/2 HP 3450 rpm 143T motor

SKU CH-WQJW-R444X

A 1-1/2 HP single-phase capacitor-start motor running at 3450 rpm on 115/208-230 V AC with a 143T rigid base frame

  • typeClosed Base
  • 1-1/2 HP output drives demanding fan loads
  • 3450 rpm speed delivers high airflow performance
  • Dual-voltage 115/208-230V wiring suits varied supplies
  • Open drip-proof enclosure protects internals from moisture
  • 143T frame fits standard rigid-base mounting patterns

Motor Overview

The Dayton 6K630 is a general-purpose, single-phase motor rated at 1-1/2 HP and 3450 rpm. It uses a capacitor-start design and fits a 143T frame with a rigid base. The open drip-proof enclosure suits indoor fan and blower applications where ambient temperatures stay at or below 40 degrees C.

Compatibility Check

Verify that your supply voltage matches 115 V or 208-230 V AC at 60 Hz. The motor draws 18.6 A at the low voltage and 9.8 to 9.3 A at the higher voltages and is usable at 208 V. Confirm the shaft rotation requirement; this unit runs clockwise or counter-clockwise and mounts at any angle. No thermal protection is built in, so external overload provision is required.

Upgrade Context

This motor replaces a failed unit of the same frame, horsepower, speed and enclosure type. The 1.15 service factor provides a modest margin for occasional load peaks. It is not suited for applications needing sealed bearings, integrated thermal switches or a totally enclosed enclosure. Buyers needing variable speed or lower noise should consider alternative designs.

Highlights

  • 1-1/2 HP output drives demanding fan loads
  • 3450 rpm speed delivers high airflow performance
  • Dual-voltage 115/208-230V wiring suits varied supplies
  • Open drip-proof enclosure protects internals from moisture
  • 143T frame fits standard rigid-base mounting patterns

Specifications

BrandDAYTON
typeClosed Base

Questions about this item

What is included with the Dayton 6K630 motor and what must be purchased separately?

The motor ships as a complete unit with a rigid base and open drip-proof enclosure. A capacitor, wiring, overload protection and any pulleys or couplings are not included and must be sourced separately.

Which voltage setting should I choose for the 115/208-230 V motor?

Wire the motor for 115 V if your supply is 115 V; wire it for 208-230 V if your supply is 208 V or 230 V. The nameplate shows full-load amps of 18.6 A at 115 V and 9.8-9.3 A at 208-230 V.

What does the 3450 rpm rating mean once the motor is installed?

At 60 Hz the motor runs at a nameplate speed of 3450 rpm under full load. With a 1.15 service factor it can handle brief overloads, and the continuous duty rating means it can operate non-stop at 40 °C ambient.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.