We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton half-horsepower jet pump motor, 56J frame, gray finish, open dripproof enclosure with drip cover kit

Dayton

Dayton 6K580BG 1/2 HP Jet Pump Motor 56J Frame 60 Hz

SKU CH-5BCW-X8JVV

1/2 HP capacitor-start jet pump motor with 56J frame and 60 Hz operation includes a drip-cover kit for vertical mounting

  • 1/2 HP output drives residential jet pumps
  • Capacitor-start design provides strong starting torque
  • Open dripproof enclosure suits dry indoor locations
  • Ball bearings extend motor service life
  • 56J frame fits standard jet pump mounts

Motor Overview

The Dayton 6K580BG is a new 1/2 HP jet pump motor built on a 56J frame for 60 Hz operation. It uses a capacitor-start design with ball bearings and carries a standard efficiency rating. The open dripproof enclosure includes a dripcover kit for vertical mounting.

Upgrade Path

This motor replaces an older unit with the same frame, voltage and horsepower ratings when the original fails or efficiency drops. The jump is worth it if the existing motor runs hot, vibrates excessively or no longer delivers rated flow. Buyers who need higher horsepower or a different frame size cannot use this model.

Practical Limits

Operation is capped at a maximum ambient temperature of 40 degrees Celsius with Class B insulation. The open enclosure requires protection from direct water spray and debris. Full-load current draws 9.0 amps at low voltage and 4.5 amps at high voltage, so supply wiring and overload protection must match those figures.

Highlights

  • 1/2 HP output drives residential jet pumps
  • Capacitor-start design provides strong starting torque
  • Open dripproof enclosure suits dry indoor locations
  • Ball bearings extend motor service life
  • 56J frame fits standard jet pump mounts

Specifications

BrandDAYTON

Questions about this item

What diameter opening does the 5.6 in motor body require for mounting?

The motor body measures 5.6 inches in diameter, so the mounting cutout or bracket must accommodate at least that width for a secure fit.

How is the included dripcover kit used during vertical installation?

The dripcover kit must be fitted over the motor shaft before securing the motor vertically; skipping this step leaves the bearings exposed to water ingress.

When should the ball bearings in this 56J frame motor be inspected or replaced?

Inspect the ball bearings annually or if noise increases; replace them when excessive play or overheating appears, especially in continuous 40 °C ambient conditions.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.