We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact white contactor with screw terminals and mounting tabs

Dayton

Dayton 6GNP5 24VAC 1P 30A Definite Purpose Contactor

SKU CH-Q0FS-WXCMN

A 24 VAC definite-purpose contactor rated 30 A inductive and 40 A resistive with a single pole and 50/60 Hz coil

  • Type3" Harsh Environment, Hook-and-Loop Closure
  • Single-pole 30 A inductive switching for motor loads
  • 40 A resistive rating handles heating elements
  • 24 VAC coil enables low-voltage control circuits
  • 50/60 Hz operation suits global power systems
  • Compact 2.64 x 2.03 x 3.41 in footprint fits tight panels

Dayton 6GNP5 24VAC Contactor

This definite-purpose contactor switches single-phase loads with a 24 VAC coil. It is built for HVAC, heating and similar control panels where a compact non-reversing device is required. Installers working to UL 508 or IEC 60947-4-1 standards can use it directly in compliant assemblies. The open-frame design suits enclosed cabinets rather than exposed locations.

Installation notes

The unit mounts in a 2.64 by 2.03 inch footprint with 3.41 inch depth, so panel space is modest. Screw terminals accept standard ring or fork lugs; no special tooling is needed beyond a screwdriver. Ensure the coil sees a clean 24 VAC 50 or 60 Hz supply to avoid chatter. The open frame means the installer must provide the final enclosure and finger-safe barriers required by local code.

Capacity and headroom

Resistive loads up to 40 amps and inductive loads up to 30 amps are within rating. At 120 VAC it handles 1 horsepower; at 240 VAC it handles 2 horsepower. Loads exceeding these current or motor ratings will cause premature contact wear or coil overheating. The contactor is not rated for reversing duty, so applications needing forward-reverse control must use a different device.

Highlights

  • Single-pole 30 A inductive switching for motor loads
  • 40 A resistive rating handles heating elements
  • 24 VAC coil enables low-voltage control circuits
  • 50/60 Hz operation suits global power systems
  • Compact 2.64 x 2.03 x 3.41 in footprint fits tight panels

Specifications

BrandDayton
Model6GNP5
Type3" Harsh Environment, Hook-and-Loop Closure

Questions about this item

How do I verify the contactor is operating correctly after wiring it to a 24VAC control circuit?

With the coil energised at 24VAC, the single pole should close cleanly and carry up to 30 A inductive or 40 A resistive load without chatter.

What ships with the 6GNP5 and what must I source separately?

The contactor itself is supplied; mounting hardware, wire connectors and any required NEMA enclosure are not included.

Should I select this 1-pole 30 A model or a different version for a 2 HP 240 V single-phase motor?

This 1-pole 30 A unit is rated for 2 HP at 240 V single-phase, matching that motor load.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.