We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent rectangular IEC magnetic contactor with screw terminals and DIN rail clip

Dayton

Dayton 6ECD6 IEC Magnetic Contactor 24V DC 3P 1NC/1NO

SKU CH-RYE8-4HQHP

A 24V DC IEC magnetic contactor with three poles, 1NO/1NC auxiliary contacts, and 50A inductive current rating

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • Controls 50 A inductive loads with 24 V DC coil
  • Switches 70 A resistive current across three poles
  • Delivers 15 hp at 240 V AC three-phase
  • Provides 40 hp at 480 V and 600 V AC
  • Compact 2.95 in square footprint saves panel space

IEC Magnetic Contactor 24V DC

This IEC-style magnetic contactor operates on a 24V DC coil and provides three main power poles rated for inductive loads up to 50 A and resistive loads up to 70 A. It includes two auxiliary contacts in a 1NO/1NC configuration for control circuit signalling. The unit is supplied without an enclosure and carries California Proposition 65 warnings for cancer and reproductive harm.

Three-pole power switching for motor control

Designed for non-reversing three-phase motor applications, the contactor handles 15 hp at 240V AC and 40 hp at both 480V AC and 600V AC. The 24V DC coil voltage requires a compatible control supply, while the open design means the installer must provide a suitable enclosure and overcurrent protection. Two built-in auxiliary contacts free up panel space by eliminating the need for separate control relays.

Compact footprint with no active cooling

Measuring 2.95 in by 2.95 in overall, the contactor fits into tight panels and dissipates heat passively without fans, so it adds no acoustic noise to the installation. Power draw is limited to the 24V DC coil consumption during operation, and the absence of moving-air components eliminates a common maintenance item. The open construction relies on the surrounding enclosure for environmental protection.

Highlights

  • Controls 50 A inductive loads with 24 V DC coil
  • Switches 70 A resistive current across three poles
  • Delivers 15 hp at 240 V AC three-phase
  • Provides 40 hp at 480 V and 600 V AC
  • Compact 2.95 in square footprint saves panel space

Specifications

BrandDAYTON
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

How much inductive current can the contactor handle continuously before it overheats?

The contactor is rated for 50 A full-load inductive current, so sustained loads above that level will cause thermal stress.

How hot or noisy does the coil get when energised at 24 V DC all day?

The 24 V DC coil runs silently with no moving fan; heat rise is limited to normal coil dissipation inside the 2.95 in square enclosure.

What auxiliary contact blocks must already be wired in for the 1NO/1NC contacts to function?

Two auxiliary contacts (1NO and 1NC) are built into the contactor itself, so no extra blocks are required for basic control circuits.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.