We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver metal 18 inch industrial ceiling fan on black pedestal stand

Dayton

Dayton 6ALE6 18" Non-Oscillating Ceiling Fan 115VAC

SKU CH-VCDT-BJY5H

An 18-inch non-oscillating ceiling fan delivering 3,480 CFM on high and 2,460 CFM on low with a 59 dBA sound level

  • styleNon-oscillating
  • typeCommercial
  • Steel construction resists wear in industrial settings
  • 18-inch blade diameter moves up to 3480 CFM on high speed
  • Two-speed motor delivers 3480 or 2460 CFM for airflow control
  • Direct-drive 1/5 HP motor runs at 59 dBA for quieter operation
  • Operates up to 104 °F ambient temperature for hot environments

18-inch non-oscillating ceiling fan for light-duty

This Dayton fan delivers fixed-direction airflow across a 18-inch blade span. It is built for commercial environments that need steady air movement without oscillation. The steel construction suits light-duty industrial settings where a stationary ceiling mount is preferred.

Two-speed 120 VAC motor with direct drive

The permanent split capacitor motor runs at 1100 RPM on high and 950 RPM on low, drawing 1.8 and 1.4 amps respectively. Airflow reaches 3480 CFM on high and 2460 CFM on low, with velocity measured at 330 and 273 feet per minute at a 20-foot distance. Sound output is 59 dBA and maximum ambient temperature is 104 degrees Fahrenheit.

Check ceiling height and electrical supply before

The assembled unit stands 65 inches tall, 27 inches wide and 21-5/8 inches deep, so verify overhead clearance for the pedestal mount. Confirm the circuit provides 120 VAC single-phase power at 60 Hz and can handle 200 watts on high speed. This model is restricted from sale in California due to Proposition 65 chemical warnings.

Highlights

  • Steel construction resists wear in industrial settings
  • 18-inch blade diameter moves up to 3480 CFM on high speed
  • Two-speed motor delivers 3480 or 2460 CFM for airflow control
  • Direct-drive 1/5 HP motor runs at 59 dBA for quieter operation
  • Operates up to 104 °F ambient temperature for hot environments

Specifications

BrandDayton
styleNon-oscillating
typeCommercial

Questions about this item

Should I pick the high or low speed for a workshop that needs steady airflow?

High speed delivers 3480 CFM at 1100 RPM and draws 1.8 amps; low speed gives 2460 CFM at 950 RPM and draws 1.4 amps, so choose high for maximum air movement or low for quieter operation.

What does the 3480 CFM rating mean once the fan is running in my space?

At high speed the fan moves 3480 cubic feet of air per minute, producing an air velocity of 330 feet per minute at 20 feet distance, which is suitable for general ventilation in a light-duty industrial area.

How does the 115 VAC single-phase supply limit the fan's performance?

The motor is rated for 120 V AC, 60 Hz, single-phase and draws up to 200 watts on high speed; it cannot exceed the 1/5 hp rating or the 1.8 amp draw on that supply.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.