We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent rectangular relay with side flange mount and eight plug-in pins

Dayton

Dayton 5YR13 Flange Relay 12 V DC 10 A 277 V AC

SKU CH-QW3Z-TR223

Flange-mount relay with 12 V DC coil, DPDT contacts rated 10 A at 277 V AC and 10 A at 28 V DC, eight plug-in pins, silver-alloy contacts and 1.37 in body depth

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • 12 V DC coil fits low-voltage control circuits
  • DPDT 8-pin plug-in speeds panel wiring
  • 10 A at 277 V AC handles mains loads
  • Side flange mount secures relay in vibration-prone enclosures
  • Silver-alloy contacts rated for 1.2 W switching capacity

Dayton 12 V DC flange relay

The Dayton 5YR13 is a flange-mount relay with a 12 V DC coil and DPDT contact form. It plugs into an 8-pin socket and uses silver-alloy contacts rated at 10 A for both 277 V AC and 28 V DC. The transparent housing lets you inspect the mechanism without disassembly.

Replaces worn plug-in relays

Swap this unit when an existing 8-pin flange relay shows contact pitting, coil failure or intermittent switching. The jump is worth it if your control circuit needs the 10 A AC rating at 277 V or the 1 hp motor rating at 240 V AC. It does not suit applications that require a built-in status indicator or a different pin layout.

Simple socket installation

Push the relay straight into a matching 8-pin socket until the flange seats against the panel. No soldering or tools are needed for the electrical connections. The main risk is misaligning the pins or using a socket with a different pin circle, which can bend terminals or leave contacts floating.

Highlights

  • 12 V DC coil fits low-voltage control circuits
  • DPDT 8-pin plug-in speeds panel wiring
  • 10 A at 277 V AC handles mains loads
  • Side flange mount secures relay in vibration-prone enclosures
  • Silver-alloy contacts rated for 1.2 W switching capacity

Specifications

BrandDAYTON
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

What panel cut-out and clearance does the 1.37 in deep side-flange relay need?

The relay body is 1.37 in deep and 1.9 in high; allow that depth behind the panel plus space for the 8-pin plug-in base and wiring.

Which orientation ensures the 8 plug-in pins seat correctly in the socket?

Align the keyway on the relay base with the socket notch, press straight in until the flange sits flush, then secure the two mounting screws.

When should the silver-alloy contacts be replaced under 10 A loads?

Plan replacement when switching cycles approach the 1.2 W maximum capacity limit or if contact resistance causes voltage drop at 10 A @ 277 V AC or 10 A @ 28 V DC.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.