We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton 5UXK1 shallow well jet pump, cast iron body, horizontal orientation, dual voltage motor housing

Dayton

Dayton 5UXK1 Shallow Well Jet Pump 1HP 115/230V

SKU CH-JTBQ-HHCH2 MPN 5UXK1

Shallow well jet pump delivers 1 hp at 115/230 V with 17.9 gpm flow at 30 psi and 25 ft max suction lift

  • TypeDrain Components
  • Delivers 17.9 gpm at 30 PSI for strong water supply
  • Dual-voltage 115/230V motor fits standard residential wiring
  • 25 ft maximum suction lift handles deep wells
  • Cast-iron construction rated to 123 psi case pressure
  • Built-in ejector simplifies installation and priming

Shallow Well Jet Pump 1HP

The Dayton 5UXK1 is a shallow well jet pump rated at 1 horsepower for residential water supply. It operates on dual voltage 115/230V AC and includes an ejector for installation. This unit suits homeowners drawing water from depths up to 25 feet.

Flow rates at 10 ft lift

At a 10-foot suction lift the pump delivers 17.9 gpm at 30 psi, 17.8 gpm at 40 psi and 17.2 gpm at 50 psi. Maximum suction lift is 25 feet and shut-off pressure reaches 65 psi. Performance declines as lift increases beyond the rated 10-foot baseline.

Pressure and temperature limits

The case and inlet are rated for a maximum pressure of 123 psi and a maximum operating temperature of 90. Inlet connection is 1-1/4 inch NPT and discharge is 1 inch NPT. These limits define the safe operating envelope for the pump housing and connections.

Highlights

  • Delivers 17.9 gpm at 30 PSI for strong water supply
  • Dual-voltage 115/230V motor fits standard residential wiring
  • 25 ft maximum suction lift handles deep wells
  • Cast-iron construction rated to 123 psi case pressure
  • Built-in ejector simplifies installation and priming

Specifications

TypeDrain Components
BrandDayton
Model5UXK1

Questions about this item

Will the 1-1/4 in NPT inlet connect to my existing 1-1/4 in well piping without adapters?

Yes, the pump inlet is a 1-1/4 in NPT thread so it mates directly with standard 1-1/4 in well piping.

How can I confirm the 1 HP motor is delivering the rated 17.9 gpm at 30 psi after installation?

Measure flow at a hose bib while the pressure gauge reads 30 psi; you should see roughly 17.9 gallons per minute.

Does the box include the ejector and all fittings, or must I buy a foot valve and pressure switch separately?

The ejector is included; a foot valve, pressure switch, pressure tank and piping are not included and must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.