We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton shallow well jet pump, cast iron body, horizontal motor mount, inlet and outlet ports visible

Dayton

Dayton 5UXJ8 Shallow Well Jet Pump 1/3 hp 115/230V 7.5 gpm

SKU CH-C77H-AGEJX MPN 5UXJ8

Shallow well jet pump delivers up to 7.5 gpm at 30 psi with 1/3 hp motor and dual 115/230V operation

  • TypeDrain Components
  • Delivers 7.5 gpm at 30 psi for strong household supply
  • Dual 115/230V voltage fits standard or heavy-duty circuits
  • 25 ft maximum suction lift reaches deep shallow wells
  • 1/3 hp motor balances power with energy efficiency
  • Cast-iron construction resists corrosion for long service life

Shallow Well Jet Pump 1/3 hp

This Dayton shallow well jet pump delivers 1/3 horsepower for residential water supply from depths up to 25 feet. It operates on dual voltage 115/230V AC and includes the ejector for straightforward setup. The unit suits homeowners needing reliable shallow well water extraction.

Sustained flow at varying pressures

At 30 PSI the pump provides 7.5 gpm, dropping to 4.5 gpm at 40 PSI and 2.8 gpm at 50 PSI with a 10 foot lift. Maximum case and inlet pressure is rated at 123 psi, while shut-off pressure reaches 66 psi. Continuous operation stays within a maximum temperature of 90 degrees.

Installation notes and common issues

The pump connects via 1-1/4 inch NPT inlet and 1 inch NPT discharge threads for standard plumbing. Proper priming and air-free suction lines are essential to reach the rated 25 foot lift. Voltage must be set correctly at the motor terminals to avoid overheating or low flow.

Highlights

  • Delivers 7.5 gpm at 30 psi for strong household supply
  • Dual 115/230V voltage fits standard or heavy-duty circuits
  • 25 ft maximum suction lift reaches deep shallow wells
  • 1/3 hp motor balances power with energy efficiency
  • Cast-iron construction resists corrosion for long service life

Specifications

TypeDrain Components
BrandDayton
Model5UXJ8

Questions about this item

How much power does the 1/3 hp motor draw on 115 V versus 230 V?

The motor is rated at 10 amps on 115 V and 4.8 amps on 230 V.

What plumbing connections and ejector are required for installation?

It has a 1-1/4 in NPT inlet, a 1 in NPT discharge, and the ejector is included.

Will this pump work with my existing 1 in NPT discharge piping and 25 ft suction lift?

Yes, the discharge is 1 in NPT and the maximum suction lift is 25 ft.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.