We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Dayton

Dayton 5UWF1 Drum Pump Motor 115V 6.4A 4/5hp

SKU CH-ERT0-ZGX9B

115 V AC drum pump motor delivers 4/5 hp at 10,000 RPM for 55-gallon drums

  • ColorTransparent
  • 4/5 hp motor delivers strong drum-pumping performance
  • 115 V AC corded power plugs into standard outlets
  • 4 A full-load current suits typical workshop circuits
  • TEFC plastic housing resists dust and moisture ingress
  • Compatible with 55 gal drums and 5UWF3-6 pump tubes

Motor and drum compatibility

This Dayton 5UWF1 electric drum pump motor runs on 115 V AC single-phase power and draws 6.4 A at a 4/5 hp rating. It is built for 55 gal drums and pairs with pump tubes 5UWF3 through 5UWF6 for liquid transfer tasks.

Installation notes and common issues

The corded AC motor mounts directly on the compatible pump tube with no separate wiring harness required. Intermittent duty cycle means the motor must cool between runs; continuous operation will trip thermal limits. Explosion-proof rating is absent, so flammable liquids are not supported.

Capacity limits and headroom

The 10,000 RPM motor moves fluid from standard 55 gal drums at a 9 5/16 in height above the container. Intermittent duty and lack of thermal protection restrict extended transfer sessions. Plastic housing and TEFC enclosure suit general-purpose use but not hazardous environments.

Highlights

  • 4/5 hp motor delivers strong drum-pumping performance
  • 115 V AC corded power plugs into standard outlets
  • 4 A full-load current suits typical workshop circuits
  • TEFC plastic housing resists dust and moisture ingress
  • Compatible with 55 gal drums and 5UWF3-6 pump tubes

Specifications

ColorTransparent
BrandDAYTON

Questions about this item

How can I verify the motor is running correctly after installation?

The motor should reach 10,000 RPM when powered at 115 V AC and draw approximately 6.4 A under full load; listen for smooth operation without excessive vibration.

What comes in the box and what must I purchase separately?

The package includes the 4/5 hp TEFC motor with plastic housing and 9 5/16 in height; a compatible pump tube such as model 5UWF3, 5UWF4, 5UWF5 or 5UWF6 must be bought separately.

Which pump tube version should I choose for a 55 gal drum?

Select any of the listed tubes — 5UWF3, 5UWF4, 5UWF5 or 5UWF6 — that matches the fluid type and material compatibility you need; all fit the 55 gal drum and this motor.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.