We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton 1/3 hp ceiling fan motor open frame with 5 inch shaft and 36 inch leads

Dayton

Dayton 5RHU0 1/3 hp ceiling fan motor 825 rpm 208-230V 4-speed

SKU CH-0SE7-SN2D4

A 1/3 hp ceiling fan motor running at 825 rpm with four speeds on 208-230V power

  • typeMotors
  • 1/3 hp output drives demanding airflow
  • Four-speed PSC design matches load precisely
  • 825 rpm at 60 Hz for quiet operation
  • 208-230 V single-phase fits standard wiring
  • Auto thermal protection prevents overheating damage

Motor Specifications

The Dayton 5RHU0 is a permanent split capacitor motor rated at 1/3 hp with a nameplate speed of 825 rpm. It operates on 208-230V AC single-phase power at 60 Hz and draws between 1.0 and 2.2 full-load amps. The 48YZ frame unit includes a 5-inch shaft and 36-inch leads for wiring flexibility.

Application Suitability

This motor suits installations requiring four-speed control and continuous duty in ambient temperatures up to 60 degrees Celsius. Automatic thermal protection and Class B insulation support reliable long-term operation. It is not intended for applications needing sealed enclosures, higher horsepower ratings, or voltage supplies outside the 208-230V range.

Installation Requirements

The open air-over enclosure demands adequate airflow around the motor housing for cooling. Stud mounting allows all-angle positioning, while reversible CW/CCW rotation adapts to various blower or fan configurations. A compatible run capacitor and speed selector must be supplied separately to enable the four-speed function.

Highlights

  • 1/3 hp output drives demanding airflow
  • Four-speed PSC design matches load precisely
  • 825 rpm at 60 Hz for quiet operation
  • 208-230 V single-phase fits standard wiring
  • Auto thermal protection prevents overheating damage

Specifications

BrandDAYTON
typeMotors

Questions about this item

What voltage supply and wiring are needed for this 208-230V AC motor?

Provide a 208-230V AC, 60 Hz single-phase supply. The motor draws 2.2 A at 1/3 hp and 1.0 A at 1/6 hp; use wire sized for that current and a compatible disconnect.

Will the 48YZ frame and 5 in shaft fit the mounting studs and blower wheel I already have?

The motor uses a 48YZ frame with stud mounting and a 5 in shaft; verify your blower wheel bore and stud pattern match those dimensions before installing.

How can I confirm the motor runs at the correct 825 RPM across all four speeds?

With power applied, use a contact or laser tachometer on the shaft; each speed tap should read approximately 825 RPM at full load, and the auto thermal protector must not trip during continuous operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.