We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton 5PXY0 portable utility pump, aluminium housing, open dripproof motor, NPT ports

Dayton

Dayton 5PXY0 1/2 hp 115V portable utility pump

SKU CH-EH64-Z2FZQ MPN 5PXY0

Portable centrifugal pump delivers up to 41 gpm at 5 ft head and 6 gpm at 40 ft, with a 46 ft maximum head and 1 in NPT connections

  • TypeDrain Components
  • ½ hp motor delivers 41 gpm at 5 ft head
  • 38 gpm at 10 ft head handles moderate lift
  • 32 gpm at 20 ft head maintains usable flow
  • 1 in NPT ports fit standard plumbing connections
  • Open drip-proof enclosure protects motor in damp areas

Portable 1/2 hp utility pump

The Dayton 5PXY0 is a single-phase centrifugal pump rated at 1/2 hp and 115V AC. It delivers up to 41 gpm at 5 ft of head and 6 gpm at 40 ft of head. The aluminum housing and open dripproof motor suit portable water-transfer tasks. California Proposition 65 warnings apply for cancer and reproductive harm.

Check inlet and outlet fit

Verify that your plumbing uses 1 in NPT connections on both intake and discharge sides. The pump requires a 115V AC supply and single-phase power. Maximum head reaches 46 ft, so confirm the lift height matches the application. No other pipe sizes or voltage options are supported.

Open motor runs warm and audible

The open dripproof enclosure allows airflow through the motor, so expect noticeable motor noise and warm surfaces during operation. Flow drops from 38 gpm at 10 ft to 32 gpm at 20 ft of head. Plan for ventilation and keep the unit dry above the housing. Power draw follows the 1/2 hp rating at 115V.

Highlights

  • ½ hp motor delivers 41 gpm at 5 ft head
  • 38 gpm at 10 ft head handles moderate lift
  • 32 gpm at 20 ft head maintains usable flow
  • 1 in NPT ports fit standard plumbing connections
  • Open drip-proof enclosure protects motor in damp areas

Specifications

TypeDrain Components
BrandDayton
Model5PXY0

Questions about this item

What comes in the box with the 5PXY0 pump, and do I need to buy the 1 inch NPT intake or discharge fittings separately?

The pump includes the 1/2 hp motor and aluminum housing with 1 inch NPT intake and discharge ports. Pipe, hose and fittings to connect to those ports are not included.

Should I choose the pump based on the 41 gpm at 5 ft head or the 6 gpm at 40 ft head for my application?

Use the 41 gpm at 5 ft head for low-lift, high-volume transfer. Use the 6 gpm at 40 ft head when you must push water to 46 ft maximum head.

What does the 46 ft maximum head mean when the pump is installed in a real system?

At 46 ft of head the flow drops to zero. Expect 32 gpm at 20 ft, 35 gpm at 15 ft, 38 gpm at 10 ft and 6 gpm at 40 ft of head.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.