Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00915116BTC
In stock
Dayton
Dayton 5PV63 Vertical Hydronic Unit Heater 595cfm
Suspended vertical hydronic unit heater delivers 595 cfm airflow with 41,300 BtuH steam and 22,700 BtuH water heating output
- typeClosed Base
- Vertical airflow delivers 595 cfm heat distribution
- Steam output reaches 41,300 BtuH at 2 PSI
- Hot-water output provides 22,700 BtuH at 200 °F
- Single-phase 1.2 A motor runs on 60 Hz power
- Threaded 1-1/2 in NPT connection simplifies piping
Dayton 5PV63 Vertical Hydronic Heater
This suspended unit heater delivers vertical airflow for steam or hot-water heating systems in commercial and industrial spaces. It produces 41,300 BtuH at 2 PSI steam and 22,700 BtuH at 200 F water with 595 cfm air flow.
Installation Notes
The unit mounts on wall or ceiling with a closed base and 1-1/2 inch threaded male NPT connections for supply and return piping. A 1.2 A single-phase motor at 60 Hz drives the 11-1/4 inch fan; verify electrical supply and pipe sizing before fitting.
Selection Deciding Spec
The 595 cfm air flow combined with 41,300 BtuH steam output determines whether this heater matches the space load; lower-output zones or higher-static duct runs will need a different model.
Highlights
- Vertical airflow delivers 595 cfm heat distribution
- Steam output reaches 41,300 BtuH at 2 PSI
- Hot-water output provides 22,700 BtuH at 200 °F
- Single-phase 1.2 A motor runs on 60 Hz power
- Threaded 1-1/2 in NPT connection simplifies piping
Specifications
| Brand | DAYTON |
|---|---|
| type | Closed Base |
Questions about this item
How can I verify the unit is delivering the rated 595 cfm airflow after installation?
Measure the temperature rise across the coil and compare it to the 41,300 BtuH steam or 22,700 BtuH water output ratings at the specified 2.34 gpm flow rate.
What components come in the box and what must be sourced separately?
The heater cabinet, motor and coil ship assembled; you must supply threaded 1 1/2 in male NPT piping, a 1.2 A 60 Hz single-phase circuit and mounting hardware.
Which capacity matches a small garage versus a larger workshop?
At 2 psi steam the unit provides 41,300 BtuH, while at 200 °F water it delivers 22,700 BtuH — choose based on your available heating medium and required heat load.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
