Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00917909BTC
In stock
Dayton
Dayton 5PV54 Hydronic Unit Heater Vertical 1490cfm
A vertical hydronic unit heater delivering 1490 cfm with 101,800 BtuH steam and 68,300 BtuH water output
- typeClosed Base
- Vertical airflow delivers 1490 cfm for even heat distribution
- Steam output reaches 101,800 BtuH at 2 PSI for strong heating
- Hot water output provides 68,300 BtuH at 200°F for efficient operation
- Low 1.2 A draw on single-phase power keeps energy use modest
- 1½ in threaded NPT connection simplifies hydronic piping integration
Vertical hydronic unit heater
The Dayton 5PV54 is a suspended vertical heater that moves 1490 cfm of air through a rectangular coil. It delivers 101,800 BtuH at 2 PSI steam and 68,300 BtuH at 200 F water. The unit runs on single-phase power at 60 Hz and draws 1.2 A.
Build integration
The heater mounts vertically with a closed base and requires a 1 1/2 in threaded male NPT connection for supply piping. A flow rate of 7.03 gpm is needed to achieve rated output. The cabinet measures 12 1/8 in high by 25 1/4 in wide by 25 1/4 in deep, leaving the floor area clear.
Included accessories
The fan guard is not supplied, so a separate guard must be sourced for safety compliance. No control valves, thermostats or mounting brackets are included in the package. The threaded connection accepts standard NPT fittings without adapters.
Highlights
- Vertical airflow delivers 1490 cfm for even heat distribution
- Steam output reaches 101,800 BtuH at 2 PSI for strong heating
- Hot water output provides 68,300 BtuH at 200°F for efficient operation
- Low 1.2 A draw on single-phase power keeps energy use modest
- 1½ in threaded NPT connection simplifies hydronic piping integration
Specifications
| Brand | DAYTON |
|---|---|
| type | Closed Base |
Questions about this item
What limits the heat output first when the unit runs continuously?
The coil and motor are rated for 101,800 BtuH at 2 PSI steam and 68,300 BtuH at 200 °F water, so the connected steam or water temperature caps sustained output.
How much noise, heat or power does the heater produce during all-day operation?
The 1.2 A, single-phase motor draws modest power; the 1,490 cfm airflow moves heat steadily, and the bare 16 3/4 in fan runs without a guard, so sound is typical for an open industrial unit.
What piping and electrical supplies must already be on site for installation?
You need 1 1/2 in male NPT threaded connections for supply and return, a 60 Hz single-phase circuit for the 1.2 A motor, and a hydronic loop capable of 7.03 gpm flow.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
