Dayton 5PV16 Hydronic Unit Heater 1800 cfm

Hydronic Unit Heater for Commercial Spaces

The Dayton 5PV16 is a suspended horizontal hydronic unit heater designed for wall or ceiling mounting in commercial and industrial environments. It delivers 1800 cfm of horizontal airflow using a 16 in fan with an OSHA compliant guard. The unit operates on a single phase 60 Hz supply drawing 2.2 A. It provides heating via steam or water through a header coil with a 1 1/2 in threaded female NPT connection.

Suited for High Output Hydronic Systems

This heater suits facilities with existing steam or water distribution infrastructure that require substantial heat output in a horizontal discharge pattern. It delivers 108 000 BtuH at 2 PSI steam and 78 400 BtuH at 200 F water with a 7.9 gpm flow rate. Buyers needing vertical downflow discharge or electric heating methods should look at alternative configurations. Spaces lacking the required piping connections or pressure ratings will not be compatible.

Capacity and Operational Headroom

The unit comfortably handles large area heating demands with its rated outputs and high airflow volume. The 24 in height and 19 5/8 in width profile fits standard structural spacing while the 13 13/16 in depth allows clearance in typical mounting scenarios. It runs out of capacity when the heating load exceeds the stated BtuH ratings or when the available steam pressure or water temperature falls below design conditions. The single phase electrical requirement limits application to standard commercial power.