We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White five-blade plastic propeller 8 in diameter 1/4 in bore

Dayton

Dayton 5JLP9 High Temperature Propeller 8 in 5 Blade 1/4 in Bore White

SKU CH-3T47-Z6QG9

An 8-inch, five-blade plastic propeller rated for 200 °F ambient temperature and 730 CFM at 3000 RPM, press-fit on a 1/4-inch bore

  • typeHigh Temperature
  • Delivers 730 cfm airflow at 3000 RPM
  • Withstands ambient temperatures up to 200 degrees F
  • Five-blade design optimises air movement efficiency
  • Press-fit 1/4 inch bore enables quick motor installation
  • High-temperature plastic construction suits demanding environments

High-temperature 8-inch propeller

The Dayton 5JLP9 is a white 8-inch propeller with five plastic blades designed for high-temperature environments up to 200 degrees Fahrenheit. It delivers 730 CFM at 3000 RPM and attaches by press fit onto a quarter-inch motor shaft. The unit is rated for a recommended motor of 1/30 horsepower and rotates clockwise facing the discharge.

Check shaft size and rotation before ordering

Verify that your motor shaft measures exactly one quarter of an inch in diameter to match the propeller bore. Confirm the motor turns clockwise when viewed from the discharge side, as this propeller is built for that rotation only. Ensure the motor does not exceed the recommended 1/30 horsepower rating and that the operating temperature stays within the 200-degree limit.

Suits replacement of identical high-temp fans

This propeller suits maintenance teams replacing a worn or damaged high-temperature fan of the same diameter, blade count, bore, rotation and material. It is not for buyers who need a different bore size, a counter-clockwise rotation, a metal blade construction, or a higher temperature rating than 200 degrees Fahrenheit.

Highlights

  • Delivers 730 cfm airflow at 3000 RPM
  • Withstands ambient temperatures up to 200 degrees F
  • Five-blade design optimises air movement efficiency
  • Press-fit 1/4 inch bore enables quick motor installation
  • High-temperature plastic construction suits demanding environments

Specifications

BrandDayton
typeHigh Temperature

Questions about this item

Does the 8 in 5 blade propeller come with a motor or mounting hardware?

The propeller attaches press fit on a motor shaft; motor and mounting hardware are not included.

How do I choose between the 730 cfm and 3000 RPM ratings?

The 730 cfm at 3000 RPM is the single published airflow figure for this propeller; select it if that flow meets your system design.

What does the 200 Degrees F max ambient temperature mean for daily operation?

It means the plastic propeller is rated to withstand continuous surrounding air temperatures up to 200 Degrees F without degrading.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.