We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White five-blade plastic propeller 7 in diameter 1/4 in bore

Dayton

Dayton 5JLP7 7 in 5-blade propeller 1/4 in bore

SKU CH-ZD0M-3EK11

A 7-inch, five-blade plastic propeller with a 1/4-inch bore delivers 320 CFM at 3,000 RPM for high-temperature ceiling fans rated up to 200°F

  • typeHigh Temperature
  • Delivers 320 CFM airflow at 3000 RPM
  • Withstands temperatures up to 200 degrees F
  • Five-blade design optimises air movement efficiency
  • Press-fit 1/4-inch bore ensures secure motor attachment
  • Recommended for 1/30 HP motor applications

Replacement Propeller for High-Temperature Use

The Dayton 5JLP7 is a five-blade plastic propeller designed as a direct press-fit replacement on a 1/4-inch motor shaft. It delivers 320 cfm at 3000 RPM and is rated for ambient temperatures up to 200 degrees F, making it suitable for demanding ventilation tasks.

Suited for CCW Rotation and Small Motor Shafts

This propeller suits maintenance teams needing a white plastic impeller with counter-clockwise facing discharge rotation for a 1/30 hp motor. It is not for applications requiring a clockwise rotation, a larger bore diameter, or metal blade construction for higher structural loads.

Airflow Capacity Within Rated Limits

The unit comfortably handles airflow requirements met by 320 cfm at the rated speed within the 200-degree thermal ceiling. It runs out of headroom when system static pressure exceeds the capability of the recommended 1/30 hp motor or when the operating temperature surpasses the specified maximum.

Highlights

  • Delivers 320 CFM airflow at 3000 RPM
  • Withstands temperatures up to 200 degrees F
  • Five-blade design optimises air movement efficiency
  • Press-fit 1/4-inch bore ensures secure motor attachment
  • Recommended for 1/30 HP motor applications

Specifications

BrandDayton
typeHigh Temperature

Questions about this item

Will my motor shaft accept the 1/4 in bore press fit?

The propeller attaches by press fit onto a 1/4 in motor shaft, so the shaft must match that diameter exactly.

Can I pair this 7 in plastic propeller with an older 1/30 hp motor?

Yes, the recommended motor rating is 1/30 hp and the bore fits a 1/4 in shaft on compatible units.

How do I verify the 320 cfm airflow after installation?

Run the motor at 3000 RPM and measure airflow; it should deliver 320 cfm in a CCW facing discharge direction.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.