We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White five-blade plastic propeller, 7-inch diameter, quarter-inch bore

Dayton

Dayton 5JLP6 High Temperature Propeller 7 in 5 Blade 1/4 in Bore White

SKU CH-5G4X-90BJ5

Moves 320 CFM at 3000 RPM with a five-blade design rated for 200 °F ambient temperature

  • typeHigh Temperature
  • Moves 320 CFM at 3000 RPM for strong airflow
  • Withstands 200 °F ambient temperature for high-heat areas
  • Five-blade design improves air movement efficiency
  • 1/4 in bore press-fits on motor shaft for secure fit
  • Recommended 1/30 hp motor keeps power draw low

Replacement Propeller for Ceiling Fans

The Dayton 5JLP6 is a five-blade propeller designed as a direct replacement for compatible ceiling fan motors. It suits homeowners or maintenance staff needing to restore airflow on an existing unit without replacing the entire fan assembly. The white plastic finish blends with standard light-coloured housings.

Press-Fit Installation on 1/4 Inch Shaft

This propeller attaches by press fit onto a motor shaft with a 1/4 inch bore, so no additional fasteners or adapters are required. It is rated for a maximum ambient temperature of 200 degrees F, allowing use in high-temperature environments where standard plastic blades might deform. The unit frees the installer from sourcing separate mounting hardware.

Factory-Balanced Five-Blade Design

Supplied as a single balanced propeller, it delivers 320 CFM at 3000 RPM when driven by a 1/30 hp motor with clockwise facing discharge rotation. No extra blades, weights or balancing clips are included, and no software or electronic configuration is involved. The package contains only the propeller itself.

Highlights

  • Moves 320 CFM at 3000 RPM for strong airflow
  • Withstands 200 °F ambient temperature for high-heat areas
  • Five-blade design improves air movement efficiency
  • 1/4 in bore press-fits on motor shaft for secure fit
  • Recommended 1/30 hp motor keeps power draw low

Specifications

BrandDayton
typeHigh Temperature

Questions about this item

Does the 200 °F maximum ambient temperature limit performance during continuous operation?

The propeller is rated for up to 200 °F ambient temperature, so sustained high-heat environments stay within its design limit.

How much noise or heat does the 5-blade design generate at 3000 RPM?

At 3000 RPM the five-blade plastic propeller moves 320 CFM; noise and motor heat depend on the motor used, not the propeller alone.

What motor shaft size and horsepower are required to mount this propeller?

It press-fits onto a 1/4 in bore shaft and the manufacturer recommends a 1/30 hp motor for proper operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.