We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White six-blade plastic propeller six inches diameter three sixteenths inch bore high temperature rated

Dayton

Dayton 5JLN5 6 in High Temperature Propeller

SKU CH-RMMB-5RGHK

Six-blade plastic propeller rated for 200 °F ambient temperature and 280 CFM at 3000 RPM

  • typeHigh Temperature
  • High-temperature operation up to 200 °F ambient
  • 280 CFM airflow at 3000 RPM for strong circulation
  • Six-blade plastic propeller delivers balanced performance
  • Press-fit 3/16 in bore enables quick motor mounting
  • Designed for 1/70 hp motor compatibility

High-Temperature Airflow

The Dayton 5JLN5 is a six-inch plastic propeller designed for high-temperature environments. It delivers 280 cfm at 3000 RPM while withstanding ambient heat up to 200 degrees Fahrenheit. The white six-blade design mounts via a press fit onto a 3/16 inch bore motor shaft.

Replaces Worn Plastic Impellers

This propeller serves as a direct replacement when an existing high-temperature impeller cracks, warps or loses balance. The jump is worth it when airflow drops below 280 cfm or vibration appears at 3000 RPM. It restores rated performance without requiring a motor change.

Handles 280 CFM at 200 Degrees F

The blade geometry comfortably moves 280 cfm in continuous 200 degree Fahrenheit ambient conditions. It runs out of headroom if the motor cannot supply 1/70 hp at 3000 RPM or if the shaft diameter differs from 3/16 inch. Higher static pressure or greater volume needs a larger diameter.

Highlights

  • High-temperature operation up to 200 °F ambient
  • 280 CFM airflow at 3000 RPM for strong circulation
  • Six-blade plastic propeller delivers balanced performance
  • Press-fit 3/16 in bore enables quick motor mounting
  • Designed for 1/70 hp motor compatibility

Specifications

BrandDayton
typeHigh Temperature

Questions about this item

What motor shaft diameter fits the 3/16 in bore on this 6 in propeller?

The propeller has a 3/16 in bore and attaches by press fit on the motor shaft, so the shaft must match that diameter for a secure connection.

How do I correctly press-fit this 6 in propeller onto the motor shaft?

Align the 3/16 in bore with the shaft and apply even axial pressure until fully seated; the common error is hammering one side, which can crack the plastic hub.

When should I replace this 200 °F rated plastic propeller?

Inspect regularly for warping, blade cracks, or discoloration from sustained heat up to 200 °F; replace immediately if any deformation or vibration appears.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.