We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White plastic four-blade propeller with centre bore

Dayton

Dayton 5JLN3 Propeller 5 1/2 In 3/16 In Bore

SKU CH-5VTC-EQ7GA

5½-inch four-blade plastic propeller rated for 200 CFM at 3000 RPM and 200 °F

  • typeHigh Temperature
  • Delivers 200 cfm airflow at 3000 RPM
  • Withstands 200 °F ambient temperature for high-heat use
  • Four-blade plastic propeller ensures balanced air movement
  • 3/16 in bore fits motor shaft via press fit
  • Designed for 1/70 hp motor compatibility

Dayton 5JLN3 Propeller for Ceiling Fans

This replacement propeller fits ceiling fans that require a 5 1/2 inch diameter and a 3/16 inch bore. It attaches by press fit onto the motor shaft and rotates counter-clockwise when facing the discharge. The unit is designed for high-temperature environments and is sold as a new component.

Airflow capacity and motor headroom

The propeller delivers 200 CFM at 3000 RPM using four plastic blades and is rated for a maximum ambient temperature of 200 degrees Fahrenheit. It is engineered to operate with a motor of 1/70 horsepower, providing adequate headroom within that power envelope. Installations demanding higher airflow, faster rotation speeds, or operation beyond the stated temperature limit will exceed its design capacity.

Included fitment and material changes

The white plastic construction reduces weight and resists corrosion in humid or heated spaces. A press-fit bore eliminates the need for set screws or keys, simplifying installation on compatible shafts. No additional hardware, adapters, or control software are supplied with this propeller.

Highlights

  • Delivers 200 cfm airflow at 3000 RPM
  • Withstands 200 °F ambient temperature for high-heat use
  • Four-blade plastic propeller ensures balanced air movement
  • 3/16 in bore fits motor shaft via press fit
  • Designed for 1/70 hp motor compatibility

Specifications

BrandDayton
typeHigh Temperature

Questions about this item

Will the 3/16 in bore press-fit onto the motor shaft of my existing ceiling fan?

The propeller attaches by press fit on a 3/16 in bore, so it will seat directly on a matching motor shaft without additional hardware.

How can I confirm the 4-blade propeller is delivering the rated 200 cfm at 3000 RPM after installation?

Measure airflow with an anemometer at the discharge; you should see approximately 200 cfm when the motor runs at 3000 RPM in a free-air test.

Does the box include any mounting hardware or adapters, or is it only the white plastic propeller?

Only the 5 1/2 in diameter, 4-blade white plastic propeller is supplied; no screws, adapters or motor are included.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.