We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small clear plastic five-blade propeller with a tiny centre bore

Dayton

Dayton 5JLL6 Propeller 5 9/16 in 3/16 in Bore High Temperature

SKU CH-VVFW-JE76K

Replacement propeller moves 155 cfm at 3,000 rpm and withstands 200 °F operating temperatures

  • typeHigh Temperature
  • Delivers 155 cfm airflow at 3000 RPM
  • Withstands temperatures up to 200 degrees Fahrenheit
  • Five-blade plastic design moves air efficiently
  • 3/16 inch bore fits motor shaft press-fit
  • Recommended for 1/100 hp motor applications

Dayton 5JLL6 High-Temperature Propeller

This Dayton 5JLL6 propeller is a replacement component for ceiling fans. It features a 5 9/16 inch diameter with five plastic blades in a clear finish. The unit mounts via a press fit onto a 3/16 inch bore motor shaft. It is rated for maximum ambient temperatures of 200 Degrees F.

Suits direct-drive fans needing CCW airflow

This propeller suits repair jobs on compatible direct-drive ceiling fan motors requiring counter-clockwise facing discharge rotation. It matches a recommended motor rating of 1/100 hp. Buyers needing a clockwise rotation, a different bore diameter, or a higher airflow rating should look at other models.

155 CFM at 3000 RPM defines the airflow

The critical specification is the airflow delivery of 155 CFM at 3000 RPM. This figure determines whether the propeller can move enough air for the specific fan housing and motor combination. Verify that your motor runs at this speed and requires this exact airflow volume before purchase.

Highlights

  • Delivers 155 cfm airflow at 3000 RPM
  • Withstands temperatures up to 200 degrees Fahrenheit
  • Five-blade plastic design moves air efficiently
  • 3/16 inch bore fits motor shaft press-fit
  • Recommended for 1/100 hp motor applications

Specifications

BrandDayton
typeHigh Temperature

Questions about this item

How do I confirm the propeller is moving the rated 155 cfm at 3000 RPM after installation?

Measure airflow at the discharge with a calibrated anemometer while the motor runs at 3000 RPM; the reading should be close to 155 cfm.

What comes in the box and what must I supply separately?

The box contains the 5-blade clear plastic propeller with a 3/16 in bore for press-fit mounting; you must provide a compatible motor shaft rated for 1/100 hp and CCW rotation.

Which version should I choose for a 200 °F maximum ambient temperature?

Select the high-temperature model rated for 200 °F max ambient; it uses plastic blades designed for that range and a press-fit bore sized at 3/16 in.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.