We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White four-blade plastic propeller 3 in diameter 1/8 in bore

Dayton

Dayton 5JLK6 High Temperature Propeller 3 in Dia 1/8 in Bore

SKU CH-84G4-BVDBR

High-temperature plastic propeller delivers 38 CFM at 3000 RPM with a 200 °F ambient rating

  • typeHigh Temperature
  • Moves 38 CFM at 3000 RPM for strong airflow
  • Withstands 200°F ambient heat for tough environments
  • Four-blade plastic design delivers efficient air movement
  • Press-fit 1/8 in bore mounts securely on motor shaft
  • Replaces OEM propeller with 1/500 hp motor match

Small Propeller for High-Temperature Motors

This 3-inch diameter plastic propeller fits a 1/8-inch motor shaft with a press-fit connection. It delivers 38 CFM at 3000 RPM using four blades in a clockwise rotation. The white plastic construction tolerates ambient temperatures up to 200 degrees Fahrenheit. It is rated for use with motors as small as 1/500 horsepower.

Press-Fit Attachment Simplifies Replacement

The propeller mounts directly onto the motor shaft without screws, set screws or keys. This allows quick removal and installation during maintenance. The press-fit design also ensures the blade hub stays centred at high rotational speeds. No additional hardware or adhesives are required for a secure fit.

Limited to Very Low-Power Shafts

The 1/500 horsepower rating restricts use to fractional-horsepower motors only. It cannot drive larger loads or overcome significant static pressure. The fixed 3-inch diameter and bore size prevent adaptation to other shaft dimensions. Operation above 200 degrees Fahrenheit or at speeds beyond 3000 RPM is not supported.

Highlights

  • Moves 38 CFM at 3000 RPM for strong airflow
  • Withstands 200°F ambient heat for tough environments
  • Four-blade plastic design delivers efficient air movement
  • Press-fit 1/8 in bore mounts securely on motor shaft
  • Replaces OEM propeller with 1/500 hp motor match

Specifications

BrandDayton
typeHigh Temperature

Questions about this item

How often should the plastic propeller be inspected or replaced given the 200 °F maximum ambient temperature rating?

The plastic propeller is rated for continuous operation up to 200 °F; inspect it periodically for warping or brittleness and replace it if deformation appears.

At 3000 RPM and 38 CFM, what limits sustained airflow before the motor overheats?

The motor is rated at 1/500 hp; sustained operation at 3000 RPM may reach its thermal limit before airflow drops below 38 CFM.

How much noise and heat does the press-fit propeller generate during all-day operation at 3000 RPM?

At 3000 RPM the small plastic propeller moves 38 CFM with minimal audible noise and negligible heat added to the 200 °F ambient limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.