We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton 4UP61 turbine pump, cast iron housing, 5 HP three-phase motor

Dayton

Dayton 4UP61 Turbine Pump 5 HP

SKU CH-66Q2-BNM5D

Three-phase turbine pump delivers up to 22.3 gpm at 160 psi shut-off pressure with a cast-iron housing and TEFC motor

  • 5 HP motor delivers 22.3 gpm at 10 psi
  • Three-phase 208-230/460 V supply suits industrial power systems
  • Cast-iron housing withstands 300 psi case pressure
  • TEFC enclosure protects motor from dust and moisture
  • 160 psi shut-off pressure handles high-head applications

Turbine pump for industrial fluid transfer

The Dayton 4UP61 is a three-phase turbine pump rated at 5 hp for continuous industrial fluid handling. Its cast iron housing and totally enclosed fan-cooled motor suit demanding environments. It connects via 1 1/4 in intake and 1 in NPT discharge fittings. Builders needing a single-phase motor or higher flow at lower pressure should look elsewhere.

Sustained output across pressure range

Flow remains steady at 22.3 gpm at both 10 psi and 20 psi, dropping only to 22 gpm at 20 psi and 21.3 gpm at 30 psi. The shut-off pressure reaches 160 psi while best efficiency occurs at 120 ft of head. Case pressure is rated to 300 psi maximum for system safety.

Three-phase power and pressure limits

The motor runs on 208-230/460V AC three-phase supply only. Maximum discharge pressure is capped at 160 psi shut-off with a 300 psi case rating. Pipe sizes are fixed at 1 1/4 in intake and 1 in NPT discharge. Installations lacking three-phase power or requiring different port sizes cannot use this unit.

Highlights

  • 5 HP motor delivers 22.3 gpm at 10 psi
  • Three-phase 208-230/460 V supply suits industrial power systems
  • Cast-iron housing withstands 300 psi case pressure
  • TEFC enclosure protects motor from dust and moisture
  • 160 psi shut-off pressure handles high-head applications

Specifications

BrandDAYTON

Questions about this item

How much heat and noise does the totally enclosed fan-cooled 5 hp three-phase motor generate during continuous operation?

The TEFC enclosure keeps the motor cool without external airflow, and the cast-iron housing dampens vibration, so heat and noise stay low during all-day runs.

What electrical supply must already be on site for this 208-230/460 V three-phase motor to run?

A three-phase service at 208-230 V or 460 V with a correctly sized starter and overload protection is required before installation.

Will the 1-1/4 in intake and 1 in NPT discharge mate with the piping I already have?

The pump uses a 1-1/4 in intake and 1 in NPT discharge; match those exact sizes and thread types when connecting to existing pipework.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.