We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton 4UP60 3 hp turbine pump trap cast iron housing

Dayton

Dayton 4UP60 3 hp Turbine Pump Trap

SKU CH-V6ZF-2PA9H MPN 4UP60

A three-phase turbine pump delivering up to 17 gpm at 160 psi shut-off pressure

  • TypeDrain Components
  • Delivers 17 gpm at 10 psi for strong low-pressure output
  • Maintains 16.8 gpm at 20 psi for consistent mid-range flow
  • Sustains 16.5 gpm at 30 psi for reliable high-pressure performance
  • Handles up to 160 psi shut-off pressure for demanding applications
  • Cast iron housing with TEFC motor ensures durable three-phase operation

Pump Purpose

The Dayton 4UP60 is a three-horsepower turbine pump built for three-phase power systems. Its cast-iron housing and totally enclosed fan-cooled motor suit industrial fluid-transfer tasks where a 1 1/4-inch intake and 1-inch NPT discharge are required. The unit operates at nameplate voltages of 208-230/460V AC.

Ideal Fit

Facilities that run three-phase supply and need a maximum shut-off pressure of 160 psi with flow rates up to 17 gpm at low head will find this pump matches their plumbing. Sites without three-phase power or that require different pipe sizes should consider other equipment.

Sustained Operation

At 10 psi the pump delivers 17 gpm, holding 16.8 gpm at 20 psi and 16.5 gpm at 30 psi. Best efficiency occurs at 130 feet of head, while the case withstands up to 300 psi. The totally enclosed fan-cooled motor maintains temperature during continuous duty cycles.

Highlights

  • Delivers 17 gpm at 10 psi for strong low-pressure output
  • Maintains 16.8 gpm at 20 psi for consistent mid-range flow
  • Sustains 16.5 gpm at 30 psi for reliable high-pressure performance
  • Handles up to 160 psi shut-off pressure for demanding applications
  • Cast iron housing with TEFC motor ensures durable three-phase operation

Specifications

TypeDrain Components
BrandDayton
Model4UP60

Questions about this item

What three-phase voltage supply does the 4UP60 turbine pump require?

The motor is rated for 208-230/460 V AC three-phase power, so your facility must provide one of those voltages.

Will the 1-1/4 inch intake and 1 inch NPT discharge connections match my existing steel piping?

Yes, the pump uses a 1-1/4 in compatible intake and a 1 in NPT discharge, which are standard sizes for threaded steel pipe.

How can I verify the pump is delivering its rated performance after installation?

Measure flow at the discharge; you should see about 17 gpm at 10 psi, 16.8 gpm at 20 psi and 16.5 gpm at 30 psi if the system head matches the 130 ft best-efficiency point.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.