We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton 1/8 hp condenser fan motor, black cylindrical body with 6 inch shaft

Dayton

Dayton 4M224 Condenser Fan Motor 1/8 hp 825 RPM 208-230V

SKU CH-ZNZN-MCCRH

Single-phase condenser fan motor runs at 825 RPM with 1/8 hp output on 208-230V power

  • typeHigh Temperature
  • 1/8 hp motor delivers 825 RPM cooling performance
  • 208-230V AC operation suits standard electrical supplies
  • Auto thermal protection prevents overheating damage
  • Totally enclosed air-over design resists dust and moisture
  • 48YZ frame with 6 in shaft fits compatible units

Dayton 1/8 hp Condenser Fan Motor

The Dayton 4M224 is a single-phase permanent split capacitor motor rated at 1/8 hp and 825 RPM. It operates on 208-230V AC power with a full-load current range of 0.95 to 0.80 amps. Designed for continuous duty, it suits HVAC condenser units and similar air-over applications. The 48YZ frame and six-inch shaft fit standard mounting configurations.

Practical limits of the 208-230V single-phase supply

The motor draws between 0.80 and 0.95 amps at full load, so the circuit and capacitor must support that current at 60 Hz. Insulation Class B and a maximum ambient temperature of 60 degrees C set the thermal boundary for reliable operation. Automatic thermal protection interrupts power if internal temperatures exceed safe limits. The totally enclosed air-over enclosure requires consistent airflow across the body for cooling.

Replaces worn condenser fan motors

This unit serves as a direct replacement for failed 1/8 hp, 825 RPM condenser fan motors using a 48YZ frame and stud mounting. The reversible CW/CCW rotation and vertical shaft-up or shaft-down mounting cover most OEM orientations. The upgrade is worth it when the original motor shows bearing noise, thermal trips, or reduced airflow. It is not for applications requiring multi-speed operation or higher horsepower ratings.

Highlights

  • 1/8 hp motor delivers 825 RPM cooling performance
  • 208-230V AC operation suits standard electrical supplies
  • Auto thermal protection prevents overheating damage
  • Totally enclosed air-over design resists dust and moisture
  • 48YZ frame with 6 in shaft fits compatible units

Specifications

BrandDayton
typeHigh Temperature

Questions about this item

Which voltage rating should I choose between 208 V and 230 V for my supply?

The motor is rated for a 208-230 V AC range and will operate on any supply within that window; select the voltage that matches your existing circuit.

What does the 825 RPM nameplate speed mean once the motor is installed?

825 RPM is the rated full-load speed at 60 Hz; actual speed will be very close to this figure when the motor drives its design load.

How does the 48YZ frame and 6 in. shaft determine fit in my condenser?

The 48YZ frame defines the bolt pattern and overall dimensions, while the 6 in. shaft length sets the mounting depth and coupling engagement for vertical shaft-up or shaft-down installation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.