We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel cylindrical utility pump with power cord, 18 1/2 inches tall

Dayton

Dayton 4LA43 1-1/4 HP 2" Plug-In Utility Pump 115V No Switch

SKU CH-DA5G-41VR9 MPN 4LA43

A 1-1/4 HP plug-in utility pump moves up to 104 gpm at 15 ft head and 95 gpm at 20 ft head with a 50 ft maximum head

  • TypeDrain Components
  • 1-1/4 HP motor delivers strong dewatering power
  • 104 gpm at 15 ft head moves water quickly
  • 50 ft maximum head handles deep sumps
  • Stainless steel body resists corrosion
  • Plug-in 115 V operation requires no wiring

1-1/4 HP Plug-In Utility Pump

The Dayton 4LA43 is a 115 volt plug-in utility pump rated at 1-1/4 horsepower. It features a stainless steel body with a polyurethane impeller and silicone carbide shaft seal. The pump moves 104 gallons per minute at 15 feet of head and 95 gallons per minute at 20 feet of head. Maximum head reaches 50 feet with a maximum solids diameter of 1/4 inch.

Direct Plug-In Installation

Installation requires a standard 120 volt AC outlet on a 15 amp circuit at 60 hertz single phase. No switch is included so the pump runs continuously when plugged in. Users must provide their own on-off control or float switch for automatic operation. Minimum sump pit diameter is 8 inches with a minimum water depth of 8 inches for proper function.

For Utility Water Transfer

This pump suits users needing high flow rates for utility water removal or transfer where continuous operation is acceptable. It is not for buyers who need automatic level control without adding a separate switch. It is also not for applications requiring solids handling larger than 1/4 inch diameter or liquid temperatures above 104 degrees Fahrenheit.

Highlights

  • 1-1/4 HP motor delivers strong dewatering power
  • 104 gpm at 15 ft head moves water quickly
  • 50 ft maximum head handles deep sumps
  • Stainless steel body resists corrosion
  • Plug-in 115 V operation requires no wiring

Specifications

TypeDrain Components
BrandDayton
Model4LA43

Questions about this item

How do I verify the pump is working as intended after setup?

Check that water moves at 104 gpm at 15 ft head and 95 gpm at 20 ft head, and that the motor draws about 15 A on a 120 V 60 Hz supply.

What is included in the box and what must be purchased separately?

The pump body, impeller and silicone-carbide shaft seal are included; a float switch, discharge hose and any required fittings are not included.

Which version or capacity should I choose for my application?

Select this 1-1/4 HP model when you need up to 50 ft max head and 104 gpm at 15 ft head; choose a lower-HP unit for smaller pits or lower flow requirements.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.