We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton 4KU63 sump pump, cast bronze body, vertical float switch, 12 in diameter, 30 1/2 in tall

Dayton

Dayton 4KU63 0.5 HP Sump Pump 120V 60Hz 5A

SKU CH-G1EK-SCZSC MPN 4KU63

A 0.5 hp cast-bronze sump pump with stainless-steel impeller, vertical-float switch, 5 A draw at 120 V, and flow rates of 60 gpm at 5 ft head

  • TypeDrain Components
  • 5 HP motor delivers up to 60 GPM at 5 ft head
  • Vertical float switch activates automatically between 13 in and 15 in water level
  • Cast bronze body with stainless steel impeller resists corrosion in sump environments
  • Handles solids up to 3/8 in diameter for reliable drainage
  • 120 V single-phase operation with 5 A draw fits standard household circuits

0.5 HP Sump Pump with Vertical Float

The Dayton 4KU63 is a 0.5 HP submersible sump pump rated for 120V AC, 60 Hz single-phase operation. It draws 5.0 amps and uses a cast bronze body with a stainless steel impeller. A vertical float switch with integral electrical connection controls automatic operation between 5 in off and 13-15 in on points. Minimum sump pit diameter is 18 in.

Homes with standard residential drainage needs

This pump suits basements or crawl spaces where vertical float actuation fits the pit and 120V power is available. It handles solids up to 3/8 in and delivers 60.0 gpm at 5 ft of head. Buyers needing higher flow at 20 ft of head or a wider pit requirement should look elsewhere. Installations requiring a tethered float or battery backup are not covered.

60.0 gpm flow rate at 5 ft of head

The decisive specification is the 60.0 gpm flow rate at 5 ft of head, dropping to 48.0 gpm at 10 ft, 33.0 gpm at 15 ft and 10.0 gpm at 20 ft. If the discharge run demands more than 10.0 gpm at 20 ft, this model will not meet the requirement. Match the pump curve to the system head before purchasing.

Highlights

  • 5 HP motor delivers up to 60 GPM at 5 ft head
  • Vertical float switch activates automatically between 13 in and 15 in water level
  • Cast bronze body with stainless steel impeller resists corrosion in sump environments
  • Handles solids up to 3/8 in diameter for reliable drainage
  • 120 V single-phase operation with 5 A draw fits standard household circuits

Specifications

TypeDrain Components
BrandDayton
Model4KU63

Questions about this item

What is the minimum sump pit diameter required for the Dayton 4KU63?

The pump requires a sump pit with a minimum diameter of 18 inches to operate correctly.

How do I set the vertical float switch so the pump turns on and off at the right levels?

The integral vertical float is factory-set to turn on between 13 and 15 inches and off at 5 inches; verify the float arm moves freely without catching on the pit wall.

What size solids can the stainless-steel impeller pass without clogging?

The impeller handles spherical solids up to 3/8 inch in diameter; larger debris should be screened out before it reaches the pump.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.