We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze rotary gear pump head with 1/2 inch NPT ports

Dayton

Dayton 4KHC2 Rotary Gear Pump Head 1/2 in NPT 10.2 gpm 125 psi

SKU CH-7WNA-93CVY MPN 4KHC2

Rotary gear pump head with 1/2 in NPT ports delivers 10.2 gpm at 100 psi up to 125 psi maximum

  • TypeDrain Components
  • Delivers 10.2 gpm at 100 psi for efficient fluid transfer
  • Withstands up to 125 psi operating pressure for demanding applications
  • Operates from -20 to 210 degrees F across varied environments
  • Bronze body with mechanical seal ensures durable, leak-resistant performance
  • 1/2 inch NPT connection fits standard plumbing installations

Pump head for 56C frame motors

The Dayton 4KHC2 is a bronze rotary gear pump head designed to couple directly with a 56C frame motor. It delivers a flow rate of 10.2 gpm at 100 psi and handles viscosities up to 550 SUS. The unit operates between -20 and 210 degrees F at a maximum pressure of 125 psi.

Suits transfer of lubricating fluids.

This pump head suits installations moving oils or similar lubricating liquids where a bronze body and Buna-N mechanical seal are compatible. It is not for potable water systems or aggressive chemicals that attack bronze. Buyers needing a self-priming lift above 12.3 ft should look elsewhere.

10.2 gpm at 100 psi determines fit

The rated flow of 10.2 gpm at 100 psi is the single figure that decides whether this head matches the system demand. Verify the required horsepower of 1 1/2 hp and the 1/2 in NPT connection size against the motor and piping before purchase.

Highlights

  • Delivers 10.2 gpm at 100 psi for efficient fluid transfer
  • Withstands up to 125 psi operating pressure for demanding applications
  • Operates from -20 to 210 degrees F across varied environments
  • Bronze body with mechanical seal ensures durable, leak-resistant performance
  • 1/2 inch NPT connection fits standard plumbing installations

Specifications

TypeDrain Components
BrandDayton
Model4KHC2

Questions about this item

How often will the Buna-N, carbon, ceramic, stainless steel mechanical seal need replacement?

The mechanical seal uses Buna-N, carbon, ceramic and stainless steel faces; replacement interval depends on fluid abrasiveness and duty cycle, so inspect at each scheduled maintenance.

At 10.2 gpm and 125 psi, will the 1 1/2 hp motor requirement become the limiting factor?

The pump head is rated for 10.2 gpm at 100 psi and a maximum of 125 psi, requiring a 1 1/2 hp motor; sustained operation at peak pressure will load the motor to its rated capacity.

How hot does the bronze body get when running continuously at 210 °F fluid temperature?

The bronze housing will approach the fluid temperature of 210 °F during continuous operation, so external surfaces become too hot to touch and require guarding or insulation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.