Dayton
Dayton 4HEZ7 Convertible Well Jet Pump 1.5 hp 115/230V AC
Convertible well jet pump delivers 1.5 hp at 115/230V AC with flow rates up to 23.2 gpm at 10 ft lift and 30 PSI
- TypeDrain Components
- 5 hp motor powers strong water delivery
- Dual 115/230V AC voltage fits standard wiring
- 2 gpm at 30 PSI from 10 ft lift
- 3 gpm at 30 PSI from 20 ft lift
- 3 gpm at 30 PSI from 80 ft lift
Convertible Well Jet Pump 1.5 hp
The Dayton 4HEZ7 is a convertible well jet pump rated at 1.5 hp for 115/230V AC operation. It suits homeowners and installers who need a single pump adaptable to shallow or deep well configurations. The unit draws 19.0 A at 115 V or 9.5 A at 230 V. An ejector is not included and must be sourced separately.
Build and connection practicalities
The pump body is designed for standard plumbing integration in residential water systems. Its convertible design allows reconfiguration between shallow and deep well setups by changing the ejector assembly. Electrical connections accommodate dual-voltage supply without rewiring the motor. The absence of a factory-fitted ejector means the installer selects the correct nozzle and venturi for the target lift and pressure.
Flow performance at lift and pressure
At 10 ft lift the pump delivers 23.2 gpm at 30 and 40 psi, dropping to 16.3 gpm at 50 psi. At 20 ft lift output is 15.3 gpm at 30 psi and 9.7 gpm at 50 psi. At 50 ft lift rates are 13.9 gpm at 30 psi, 11.9 gpm at 40 psi and 6.2 gpm at 50 psi. At 80 ft lift the pump provides 5.3 gpm at 30 psi.
Highlights
- 5 hp motor powers strong water delivery
- Dual 115/230V AC voltage fits standard wiring
- 2 gpm at 30 PSI from 10 ft lift
- 3 gpm at 30 PSI from 20 ft lift
- 3 gpm at 30 PSI from 80 ft lift
Specifications
| Type | Drain Components |
|---|---|
| Brand | Dayton |
| Model | 4HEZ7 |
Questions about this item
What voltage standard does the 115/230V AC motor support, and what current does it draw at each setting?
The pump runs on 115 V AC at 19.0 A or 230 V AC at 9.5 A, so the supply must match the chosen voltage.
What piping connections are required to mount the convertible well jet pump?
The unit needs a suction line and a discharge line sized for the listed flow rates; an ejector is not included and must be sourced separately.
How is the pump wired for 115 V versus 230 V, and what step is often missed?
Reconfigure the motor terminal links to match the supply voltage before powering up; forgetting to switch the links is the common error.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor Made 12" x 18" Jolly Roger Novelty Flag 1818 marine electronic
- Accessories



