We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear PVC discharge hose 5 ft long with stainless steel tri-clamp fittings at both ends

Dayton

Dayton 4HA24 Discharge Hose 1in ID 5ft PVC

SKU CH-9C3P-5210M MPN 4HA24

A 5 ft PVC discharge hose with 1 in inside diameter and stainless-steel Tri-Clamp fittings rated to 28 psi at 70 °F

  • TypeDrain Components
  • Tri-Clamp fittings enable quick sanitary connections
  • 28 psi working pressure handles moderate discharge tasks
  • 10 to 150 °F range suits varied environments
  • Diesel exhaust fluid compatible for DEF transfer
  • Flexible PVC construction resists kinking and abrasion

1-inch ID PVC Discharge Hose

The Dayton 4HA24 is a 5-foot discharge hose with a 1-inch inside diameter and 1-1/4-inch outside diameter. It is built for transferring fluids in plumbing and automotive service settings. Tri-Clamp fittings on both ends provide a secure stainless-steel connection. The hose suits installers who need a short, food-grade-compatible length for pump or drain lines.

Capacity and pressure limits

The hose handles a maximum working pressure of 28 psi at 70 degrees Fahrenheit. Its flexible PVC tube and cover move water, mild chemicals or diesel exhaust fluid through the 1-inch bore. The 5-foot length keeps pressure drop low on short runs but will not reach distant equipment without additional hose sections.

Temperature range and material notes

Operating temperatures span from -10 to 150 degrees Fahrenheit, so the hose stays pliable in cold weather and resists softening in hot fluid service. Both fittings are stainless-steel Tri-Clamp type sized at 1-1/4 inches. The assembly is not rated food grade, and California Proposition 65 warnings apply for cancer and reproductive harm.

Highlights

  • Tri-Clamp fittings enable quick sanitary connections
  • 28 psi working pressure handles moderate discharge tasks
  • 10 to 150 °F range suits varied environments
  • Diesel exhaust fluid compatible for DEF transfer
  • Flexible PVC construction resists kinking and abrasion

Specifications

TypeDrain Components
BrandDayton
Model4HA24

Questions about this item

Will the 1 in inside diameter and 1-1/4 in Tri-Clamp fittings connect to my existing 1 in PVC drain line?

The hose has a 1 in inside diameter and 1-1/4 in Tri-Clamp fittings on both ends. You will need matching 1-1/4 in Tri-Clamp ferrules or adapters on your existing line to make a secure connection.

How can I verify the hose is rated for the 28 psi working pressure at 70 °F after installation?

Pressurise the system to its normal operating level, not exceeding 28 psi at 70 °F, then inspect both Tri-Clamp joints and the PVC tube for leaks or bulging. No leakage confirms the assembly is holding the rated pressure.

Does the 5 ft hose come with gaskets or clamps for the two 1-1/4 in Tri-Clamp ends, or must I buy them separately?

The hose ships with stainless-steel Tri-Clamp fittings already crimped on each end. Tri-Clamp gaskets and clamps are not included and must be purchased separately to complete each connection.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.