We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel utility pump with open dripproof motor housing and FNPT intake

Dayton

Dayton 4CUK6 Utility Pump 1/2 HP 115V 7.4A

SKU CH-9T82-VT6FF MPN 4CUK6

A 1/2 hp utility pump delivers up to 15.8 gpm at 5 ft head and 145 ft maximum head for drainage applications

  • TypeDrain Components
  • 1/2 hp motor delivers 15.8 gpm at 5 ft head
  • Stainless steel housing resists corrosion during continuous drainage
  • Single-phase 115 V design suits standard household circuits
  • 145 ft maximum head handles deep sump or lift applications
  • 1 in FNPT intake and NPT discharge simplify pipe connections

Utility Pump 1/2 HP 115V

The Dayton 4CUK6 is a single-phase utility pump rated at 1/2 hp and 115V AC. It draws 7.4 amps and features a stainless-steel housing with an open dripproof motor enclosure. Intake and discharge connections are both 1 inch NPT.

Homeowners and light-duty contractors

This pump suits users moving water in drainage or transfer tasks where single-phase 115V power is available. Buyers needing three-phase supply or higher head pressure than 145 ft should look elsewhere.

Maximum head 145 ft

The pump delivers a maximum head of 145 ft, with flow rates of 15.8 gpm at 5 ft, 15.1 gpm at 40 ft, 15 gpm at 60 ft, and 14.9 gpm at 80 ft. This head rating determines whether the unit matches the installation requirements.

Highlights

  • 1/2 hp motor delivers 15.8 gpm at 5 ft head
  • Stainless steel housing resists corrosion during continuous drainage
  • Single-phase 115 V design suits standard household circuits
  • 145 ft maximum head handles deep sump or lift applications
  • 1 in FNPT intake and NPT discharge simplify pipe connections

Specifications

TypeDrain Components
BrandDayton
Model4CUK6

Questions about this item

Which capacity should I choose for this utility pump?

This model is a 1/2 hp unit rated at 115V and 7.4 amps, delivering up to 15.8 gpm at 5 ft of head and 145 ft maximum head.

What does the 145 ft maximum head mean when the pump is installed?

It indicates the highest vertical lift the pump can achieve; flow decreases as head rises, with 15.1 gpm at 40 ft, 15 gpm at 60 ft, and 14.9 gpm at 80 ft.

What pipe connections does the 1 in NPT intake and discharge require?

Both ports use 1 in NPT threads, so standard 1 in NPT fittings or adapters will connect directly to the stainless steel housing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.