Dayton 4A715 Brass Steam Solenoid Valve 3/8 in

Brass Steam Solenoid Valve 3/8 in

This Dayton 4A715 brass solenoid valve body is a normally closed, two-way, two-position drain component with a 3/8 inch nominal pipe size and orifice. It is designed for steam service up to a maximum fluid temperature of 400 degrees Fahrenheit and carries a water pressure differential rating of 300 psi. The valve body is sold without a coil, so a compatible coil must be sourced separately for operation.

For steam control and drain applications needing

This valve suits installers who need a brass body rated for high-temperature steam and water service in indoor or outdoor environments. It is not for buyers who require a complete assembly with a coil included, nor for systems operating below the 2 psi minimum pressure differential or above the 300 psi water pressure limit. The unit is also restricted from sale in certain jurisdictions due to chemical content warnings.

Check pipe size, pressure.

Before ordering, verify that your piping matches the 3/8 inch nominal size and that system pressure stays within the 2 psi minimum and 300 psi maximum water differential. Confirm the maximum fluid temperature does not exceed 400 degrees Fahrenheit and that you have or can obtain a coil compatible with this valve body for the required voltage and duty cycle.