We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass solenoid valve body with 1/4 inch pipe connections

Dayton

Dayton 4A704 1/4 in Brass Solenoid Valve Trap

SKU CH-H5ZY-WD0PZ MPN 4A704

Brass solenoid valve body with 1/4 in pipe size, configurable 3-way flow, 0.17-0.22 Cv, up to 40 psi and 180°F

  • TypeDrain Components
  • 1/4 in brass body resists corrosion
  • 3-way configurable design directs flow
  • Cv 0.17 and 0.22 suit low-flow needs
  • Operates up to 40 psi air or water
  • Handles fluid temperatures to 180 °F

Brass Solenoid Valve Body

The Dayton 4A704 is a brass solenoid valve body with a quarter inch pipe connection. It operates as a three way two position valve that can be configured for different starting states. The unit is rated for indoor and outdoor environments and carries a Proposition 65 warning for chemical exposure. Builders needing a compact fluid control component will find the design straightforward to integrate.

Integration Requirements

The valve body accepts a standard quarter inch pipe fitting and operates with a minimum pressure differential of zero psi. Maximum operating pressure is forty psi for both air or inert gas and water service. Fluid temperature must not exceed one hundred eighty degrees Fahrenheit. A separate coil must be supplied to complete the assembly and the orifice diameter of three thirty seconds inch determines the flow capacity.

Coil and Flow Characteristics

The product is sold as a valve body less coil so the installer selects a coil that matches the system voltage and duty cycle. Two Cv values of point one seven and point two two are listed reflecting the configurable flow paths. This flexibility allows the same body to serve different circuit designs without changing the piping layout. The brass construction resists corrosion in typical plumbing environments.

Highlights

  • 1/4 in brass body resists corrosion
  • 3-way configurable design directs flow
  • Cv 0.17 and 0.22 suit low-flow needs
  • Operates up to 40 psi air or water
  • Handles fluid temperatures to 180 °F

Specifications

TypeDrain Components
BrandDayton
Model4A704

Questions about this item

What is the maximum fluid temperature the Dayton 4A704 brass valve body can handle?

The brass valve body is rated for a maximum fluid temperature of 180 degrees Fahrenheit.

What are the maximum operating pressure differentials for air and water?

Both air or inert gas and water have a maximum operating pressure differential of 40 psi.

What coil specifications are required since this valve body is sold without a coil?

You must supply a compatible 3-way, 2-position coil that matches the 1/4 inch pipe size and your voltage requirements.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.