We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass solenoid valve body, 3/8 inch pipe size, normally closed configuration

Dayton

Dayton 4A697 Brass Solenoid Valve 3/8 in Trap

SKU CH-N13T-WBK72 MPN 4A697

Brass 2-way solenoid valve body, normally closed, 3/8 in pipe, Cv 2.8, rated to 100 psi and 180 °F

  • TypeDrain Components
  • Brass body resists corrosion for long service life
  • Normally closed design stops flow automatically when de-energised
  • 8 Cv rating handles moderate flow rates efficiently
  • Rated to 100 psi for both air and water systems
  • Operates up to 180 °F fluid temperature

Brass solenoid valve body

The Dayton 4A697 is a brass solenoid valve body with a 3/8 in nominal pipe size and 5/8 in orifice. It operates as a normally closed, two-way, two-position valve with a Cv of 2.8. The body is rated for indoor or outdoor use and handles fluid temperatures up to 180 Degrees F. No coil is included with this valve body.

Installers needing a 3/8 in brass valve body

This valve body suits plumbing or HVAC technicians replacing or assembling a normally closed solenoid valve on 3/8 in piping for air, inert gas, or water up to 100 psi. It is not for buyers who need a complete actuated valve with a coil, or who require a different pipe size, orifice, or normally open configuration.

3/8 in pipe size with 5/8 in orifice

The nominal pipe size of 3/8 in and orifice diameter of 5/8 in determine flow capacity and connection compatibility. Verify these dimensions match the existing piping and required Cv of 2.8 before purchase. The brass body and 180 Degrees F fluid temperature limit define the service envelope.

Highlights

  • Brass body resists corrosion for long service life
  • Normally closed design stops flow automatically when de-energised
  • 8 Cv rating handles moderate flow rates efficiently
  • Rated to 100 psi for both air and water systems
  • Operates up to 180 °F fluid temperature

Specifications

TypeDrain Components
BrandDayton
Model4A697

Questions about this item

What coil voltage must I supply for the 4A697 brass solenoid valve to operate?

The valve body is sold without a coil; you must provide a compatible coil that matches your control voltage and the 3/8 in pipe size.

Can the 4A697 valve handle the same 100 psi water pressure as my existing 3/8 in brass fittings?

Yes, the valve body is rated for a maximum operating pressure differential of 100 psi for water, matching typical 3/8 in brass plumbing.

How do I verify the 4A697 valve opens when energised after installation?

Apply the rated coil voltage and confirm flow through the 3/8 in ports; the normally closed design should allow water passage up to 180 Degrees F when energised.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.