We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton 41TK12 rotary gear pump 316 stainless steel half inch inlet one and a half horsepower

Dayton

Dayton 41TK12 Rotary Gear Pump 316SS 1/2 in 1-1/2 hp

SKU CH-GWPZ-3ZZ3P

Rotary gear pump in 316 stainless steel delivers up to 10.8 gpm at 125 psi with a 1-1/2 hp motor

  • Handles up to 125 psi operating pressure for demanding fluid transfer
  • 316 stainless steel construction resists corrosion in harsh chemical environments
  • 8 gpm maximum flow rate moves high volumes efficiently
  • Self-priming to 12.3 ft suction lift eases installation above source
  • Viton mechanical seal withstands 32 °F to 280 °F temperature range

Dayton 41TK12 Rotary Gear Pump

The Dayton 41TK12 is a rotary gear pump built for industrial fluid transfer. It uses a 316 stainless steel body with a 1/2 inch intake connection and a 1-1/2 hp single-phase motor rated for 115/230V AC. The pump delivers up to 10.8 gpm at a maximum pressure of 125 psi.

Suited for moderate-viscosity fluids

This pump handles media up to 500 SUS viscosity and operates between 32 and 280 degrees Fahrenheit. The mechanical Viton seal and totally enclosed fan-cooled motor support reliable indoor service. It is not suited for applications requiring flows above 10.8 gpm or pressures beyond 125 psi, nor for fluids exceeding the stated viscosity limit.

Capacity headroom up to 10.8 gpm and 125 psi

The spur gears in polyphenylene sulfide provide steady displacement within the rated range. A maximum suction lift of 12.3 ft allows flexible placement relative to the fluid source. Headroom ends at the nameplate limits; higher flow, pressure, temperature or viscosity demands will require a larger pump.

Highlights

  • Handles up to 125 psi operating pressure for demanding fluid transfer
  • 316 stainless steel construction resists corrosion in harsh chemical environments
  • 8 gpm maximum flow rate moves high volumes efficiently
  • Self-priming to 12.3 ft suction lift eases installation above source
  • Viton mechanical seal withstands 32 °F to 280 °F temperature range

Specifications

BrandDAYTON

Questions about this item

What power supply and motor starter are required for the 1-1/2 hp motor on this 115/230 V AC pump?

The motor runs on single-phase 115/230 V AC and is totally enclosed fan cooled; provide the matching voltage supply and a starter rated for 1-1/2 hp at the chosen voltage.

Can the 1/2 in intake on this 316 SS rotary gear pump connect to my existing 1/2 in NPT piping?

The media intake connection is 1/2 in; verify that your piping uses the same thread standard before joining them.

How do I confirm the pump is delivering its rated flow after installation?

With fluid viscosity at or below 500 SUS and suction lift within 12.3 ft, measure the outlet flow; it should reach the maximum 10.8 gpm when operating pressure is below 125 psi.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.