Dayton
Dayton 41TK09 Rotary Gear Pump 1-1/2 hp 3/8 in Inlet
Delivers up to 7.9 gpm at 125 psi with a 1-1/2 hp motor and 3/8 in inlet
- Delivers up to 7.9 gpm flow rate for efficient transfer
- Handles viscous fluids up to 500 SUS with spur steel gears
- Operates from 32 to 280 °F across demanding environments
- Self-primes with 7.9 ft suction lift for flexible installation
- Runs on 115/230 V single-phase power with TEFC motor protection
Dayton 41TK09 Rotary Gear Pump
The Dayton 41TK09 is a cast-iron rotary gear pump driven by a 1-1/2 hp single-phase motor rated for 115/230V AC. It delivers up to 7.9 gpm at 125 psi maximum pressure and handles fluids up to 500 SUS viscosity. The 3/8 inch intake connection and Viton mechanical seal suit industrial fluid-transfer tasks.
Installation notes
The pump uses a standard 115/230V single-phase supply and a totally enclosed fan-cooled motor, so wiring follows common shop practice. A 3/8 inch inlet fitting matches the stated connection size. The maximum suction lift is 7.9 ft, so the source must be positioned accordingly. Operating range spans 32 to 280 degrees F; verify fluid temperature stays within these limits.
Who this suits
This unit fits operations needing a compact, steel-gear pump for moderate-flow lubrication or transfer duties up to 7.9 gpm and 125 psi. Buyers who need higher flow rates, greater suction lift, or different port sizes should look at other models. The cast-iron body and Viton seal target compatible fluids; those pumping aggressive chemicals outside the material ratings should consider alternative constructions.
Highlights
- Delivers up to 7.9 gpm flow rate for efficient transfer
- Handles viscous fluids up to 500 SUS with spur steel gears
- Operates from 32 to 280 °F across demanding environments
- Self-primes with 7.9 ft suction lift for flexible installation
- Runs on 115/230 V single-phase power with TEFC motor protection
Specifications
| Brand | DAYTON |
|---|
Questions about this item
How can I verify the pump is operating correctly after installation?
Confirm the motor runs on 115 or 230 V single-phase power, the outlet pressure does not exceed 125 psi, the flow reaches up to 7.9 gpm and the fluid temperature stays between 32 °F and 280 °F.
What comes in the box and what must I supply myself?
The pump body with cast-iron housing, steel spur gears, Viton mechanical seal and 3/8 in intake connection is included; you must provide 115/230 V single-phase wiring, mounting hardware and suitable piping.
Which capacity should I choose for my application?
This model delivers a maximum flow of 7.9 gpm at 125 psi with a 1-1/2 hp motor; select it when your required flow and pressure fall within those limits.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
