We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton rotary gear pump 316 stainless 3/8 inch inlet 1hp motor

Dayton

Dayton 41TK07 Rotary Gear Pump 316SS 3/8" 1hp

SKU CH-6AR9-Z6C66

A 316 stainless-steel rotary gear pump delivering up to 4.8 gpm at 125 psi with a 1 hp TEFC motor for 115/230V single-phase power

  • Handles up to 280 °F with 316 stainless steel body
  • Delivers 4.8 gpm at 125 psi maximum pressure
  • Pumps viscous fluids up to 500 SUS with spur gears
  • Self-primes to 3.5 ft lift using Viton mechanical seal
  • Runs on 115/230 V single-phase TEFC motor at 1 hp

Pump Overview

The Dayton 41TK07 is a rotary gear pump built with 316 stainless steel and a 3/8 inch inlet. It suits industrial fluid transfer where chemical compatibility and steady flow matter. The unit delivers up to 4.8 gpm at 125 psi maximum pressure. Single-phase 115/230V AC power drives the 1 hp motor.

Installation Notes

The pump uses a totally enclosed fan-cooled motor and a mechanical seal with Viton material. Single-phase wiring simplifies electrical hookup for standard supplies. Media viscosity must not exceed 500 SUS or flow will suffer. Suction lift is limited to 3.5 ft so the source must stay close to the inlet.

Best Fit

This model fits operators moving clean, compatible liquids up to 280 °F in continuous duty. The 316SS construction resists many corrosive media. Buyers needing higher flow rates or deeper suction lifts should consider larger displacement pumps. Applications above 125 psi or beyond the temperature range are not suitable.

Highlights

  • Handles up to 280 °F with 316 stainless steel body
  • Delivers 4.8 gpm at 125 psi maximum pressure
  • Pumps viscous fluids up to 500 SUS with spur gears
  • Self-primes to 3.5 ft lift using Viton mechanical seal
  • Runs on 115/230 V single-phase TEFC motor at 1 hp

Specifications

BrandDAYTON

Questions about this item

How can I confirm the pump is delivering the rated 4.8 gpm after installation?

Run the pump at the nameplate voltage of 115/230V AC and measure the outlet flow with a calibrated meter; it should reach up to 4.8 gpm at pressures up to 125 psi with fluid viscosity no higher than 500 SUS.

What comes with the 41TK07 and what must I supply separately?

The unit includes the 316 stainless steel pump body, 3/8 in intake connection, 1 hp TEFC motor, Viton mechanical seal and polyphenylene sulfide spur gears; you must provide piping, fittings, a 115/230V single-phase power source and fluid within the 32–280 °F range.

Which voltage setting should I select for a 115 V single-phase supply?

Wire the motor for the 115 V tap on the dual-voltage nameplate; the pump is rated for single-phase operation at either 115 V or 230 V AC.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.