Dayton
Dayton 41NL02 Direct Drive Motor 1/25 HP
Single-phase permanent split capacitor motor delivers 1/25 hp at 550 RPM on 115 V AC with auto thermal protection
- 1/25 HP direct drive powers HVAC equipment
- Permanent split capacitor design ensures reliable single-phase operation
- 115 V AC at 0.55 A matches existing wiring
- Auto thermal protection prevents overheating damage
- Replaces multiple Dayton OEM models for easy installation
Direct-drive HVAC motor for OEM replacement
The Dayton 41NL02 is a permanent split capacitor motor rated at 1/25 hp and 115 V AC. It serves as a direct substitute for several Dayton part numbers including 1HKL2C, 1HKL3C, 1HKL9C and 1HLA1C. Installers working on residential or light-commercial air-handling equipment will find it a straightforward drop-in component.
Continuous duty at 550 RPM
The motor delivers a steady 550 RPM under full-load conditions of 0.55 A and a service factor of 1. Insulation class B and a maximum ambient temperature of 40 °C support sustained operation without nuisance tripping. Automatic thermal protection resets once the winding temperature falls back within limits.
Single-speed 115 V AC supply only
This unit operates on a single-phase 115 V, 60 Hz supply and is not usable at 200 V or 208 V. Builders who need multi-speed control or dual-voltage flexibility must select a different model.
Highlights
- 1/25 HP direct drive powers HVAC equipment
- Permanent split capacitor design ensures reliable single-phase operation
- 115 V AC at 0.55 A matches existing wiring
- Auto thermal protection prevents overheating damage
- Replaces multiple Dayton OEM models for easy installation
Specifications
| Brand | DAYTON |
|---|
Questions about this item
How much heat does the 1/25 HP motor generate when running continuously at 550 RPM?
The motor is rated for a maximum ambient temperature of 40 degrees C and uses Class B insulation with automatic thermal protection to manage heat during continuous operation.
What electrical supply is required for the 115V AC motor to operate?
The motor requires a single-phase 115V AC, 60 Hz power source and draws 0.55 A at full load; it is not usable at 200V or 208V.
Will this non-standard frame motor fit the mounting pattern of my existing Dayton 1HKL2C unit?
Yes, it is listed as a direct OEM replacement for the Dayton 1HKL2C, 1HKL3C, 1HKL9C and 1HLA1C models.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
