Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00940356BTC
In stock
Dayton
Dayton 40M302 Filter Kit 10 Micron 50 psi 25 gpm
Canister-style fuel filter kit removes particulate and water at up to 25 gpm with a 10 micron rating and 50 psi maximum pressure
- TypeOther
- Removes particles down to 10 micron for clean fuel
- Handles up to 25 gpm flow for high-demand systems
- Rated to 50 psi operating pressure for reliable performance
- Canister-style design filters both particulate and water
- Buna-N gasket ensures a durable, leak-resistant seal
Fuel Filtration Kit
The Dayton 40M302 Filter Kit is a canister-style fuel filter designed to remove particulate and water contamination. It handles a maximum flow rate of 25 gpm at an operating pressure up to 50 psi. The unit carries a 10 micron filter rating for fine contamination control. Connections use 1 1/2 in UNF threads on both intake and discharge ports.
Diesel Equipment Maintenance
This kit suits operators maintaining diesel fuel systems who need combined water and particulate removal at moderate flow rates. It is not intended for applications exceeding 50 psi or 25 gpm throughput. Buyers requiring higher pressure ratings or larger port sizes should look at alternative filtration hardware. The Buna-N gasket material determines chemical compatibility limits.
10 Micron Filter Rating
The single specification that decides fitment is the 10 micron maximum filter rating. This rating defines the smallest particle size the media captures under test conditions. Verify that your engine or system manufacturer specifies this micron level for adequate protection. A finer or coarser rating will not meet the same cleanliness target.
Highlights
- Removes particles down to 10 micron for clean fuel
- Handles up to 25 gpm flow for high-demand systems
- Rated to 50 psi operating pressure for reliable performance
- Canister-style design filters both particulate and water
- Buna-N gasket ensures a durable, leak-resistant seal
Specifications
| Brand | DAYTON |
|---|---|
| Type | Other |
Questions about this item
How do I install the 1 1/2 in UNF connections without cross-threading?
Hand-tighten the UNF threads on both the 1 1/2 in intake and discharge ports until the Buna-N gasket seats, then finish with a wrench; the step most people skip is lubricating the gasket first.
When will the 10 micron filter element need replacement?
Replace the canister element when flow drops below 25 gpm or pressure rise indicates the media is saturated with particulate and water.
What pressure limit appears first during continuous operation?
The 50 psi maximum operating pressure is the first limit reached under sustained use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
