We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel utility pump cylindrical body 7 in diameter 9 in height

Dayton

Dayton 3YU64 1/4 HP Utility Pump

SKU CH-90KT-CHRKW MPN 3YU64

A 1/4 HP stainless steel utility pump moves up to 19 gpm at 5 ft head for drainage tasks

  • TypeDrain Components
  • 1/4 HP motor delivers 19 gpm at 5 ft head
  • Stainless steel body resists corrosion for long service life
  • 23 ft maximum head handles demanding drainage tasks
  • 115 V AC plug-in operation with 2.5 A draw
  • Polyamide impeller and Buna-N seal ensure reliable pumping

1/4 HP Stainless Steel Utility Pump

The Dayton 3YU64 is a plug-in utility pump rated at 1/4 horsepower for 115 V AC operation. Its stainless steel body and polyamide impeller resist corrosion while handling liquids up to 104 degrees F. A Buna-N shaft seal and 1/8 inch maximum solids passage suit clear water transfer and dewatering tasks. The unit requires an 18 inch minimum sump pit diameter for installation.

Suited for basement dewatering and tank transfer

Homeowners and technicians needing automatic water removal from sump pits or tanks will find the flow rates practical. The pump delivers 19 gpm at 5 feet of head, 13 gpm at 10 feet, 8.8 gpm at 15 feet and 4 gpm at 20 feet, with a 23 foot maximum head. Buyers who need an integrated float switch for automatic on-off cycling should look at a different model because no switch is included with this unit.

Maximum head determines site suitability

The 23 foot maximum head is the single specification that decides whether this pump can overcome the vertical lift in a given installation. If the discharge point exceeds this height the pump will not move water. Verify the total dynamic head of the system before purchase to ensure the 3YU64 matches the application.

Highlights

  • 1/4 HP motor delivers 19 gpm at 5 ft head
  • Stainless steel body resists corrosion for long service life
  • 23 ft maximum head handles demanding drainage tasks
  • 115 V AC plug-in operation with 2.5 A draw
  • Polyamide impeller and Buna-N seal ensure reliable pumping

Specifications

TypeDrain Components
BrandDayton
Model3YU64

Questions about this item

What flow rate does the 1/4 HP pump deliver at 10 ft of head?

At 10 ft of head the pump moves 13 gpm, as listed in the performance data.

What minimum sump pit diameter is required for this utility pump?

The pump needs a sump pit at least 18 in wide to fit and operate correctly.

How is the pump powered and what switch setup does it need?

It plugs into a 115 V AC outlet drawing 2.5 A and ships without a switch, so you must add your own float or manual control.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.