We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton 3PXJ9 electric drum pump stainless steel 39in suction tube 110V NEMA 5-15P plug 16ft cord

Dayton

Dayton 3PXJ9 Electric Drum Pump 110V 16psi 39in

SKU CH-HZK8-DM7JM MPN 3PXJ9

Electric drum pump transfers fluids at up to 7 gpm with 16 psi pressure using a 39-inch suction tube and 110 V AC power

  • TypeDrain Components
  • Delivers up to 7 gpm oil flow for fast drum transfer
  • 16 psi maximum head pressure handles viscous fluids effectively
  • 39 in suction tube reaches deep containers without tilting
  • 110 V AC power with 16 ft cord plugs into standard NEMA 5-15P outlet
  • Self-priming design with thermal protection runs dry safely

Electric drum pump for 110 V AC supply

The Dayton 3PXJ9 is a corded electric drum pump designed to transfer fluids from standard drums using a 110 V AC power source with a NEMA 5-15P plug. It suits workshops and industrial sites that need a self-priming pump capable of running dry without damage. Variable speed control lets the operator adjust flow to match the task. Thermal protection guards the motor during extended use.

Thermals noise and power draw in normal use

Thermal protection prevents motor overheating during continuous operation at the rated 110 V AC and 50/60 Hz supply. The pump runs dry safely, eliminating the risk of damage if the drum empties unexpectedly. A 16 ft cord provides reach without an extension lead, keeping voltage drop low. No discharge hose is included, so the installer chooses a hose that matches the required outlet pressure.

Maximum outlet pressure of 16 psi

The pump delivers a maximum outlet pressure of 16 psi and a maximum head pressure of 16 psi, which determines whether it can overcome the system resistance in a given installation. Maximum oil flow reaches 7 gpm when the discharge line allows it. The 39 in suction tube with a 1 5/8 in outer diameter fits deep drums, and the unit is intended for use with SP-ENC-V or SP-8600-39 equipment.

Highlights

  • Delivers up to 7 gpm oil flow for fast drum transfer
  • 16 psi maximum head pressure handles viscous fluids effectively
  • 39 in suction tube reaches deep containers without tilting
  • 110 V AC power with 16 ft cord plugs into standard NEMA 5-15P outlet
  • Self-priming design with thermal protection runs dry safely

Specifications

TypeDrain Components
BrandDayton
Model3PXJ9

Questions about this item

How do I install the 39 in suction tube with the NEMA 5-15P plug on 110 V AC power?

Insert the 39 in suction tube into the drum bung opening, connect the NEMA 5-15P plug to a 110 V AC outlet, and ensure the pump is positioned vertically; the step often missed is confirming the tube reaches the drum bottom before starting.

What maintenance will the electric drum pump need over time?

The pump runs dry and has thermal protection, so no lubrication is required; periodically inspect the 39 in suction tube and cord for wear, and clean any residue from the tube after each use to maintain flow.

What limit appears first during continuous operation at 16 psi?

Thermal protection will activate first if the motor overheats during sustained use at 16 psi, automatically shutting off the pump until it cools to prevent damage.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.