Dayton
Dayton 36VF35 2 HP 1165 rpm HVAC Control
General-purpose three-phase motor delivers 2 HP at 1165 rpm in an open dripproof 182/4T frame
- TypeTemperature Controllers
- 2 HP motor delivers strong HVAC airflow
- 1165 rpm speed suits ventilation and cooling duties
- Dual-voltage 208-230/460 V fits common three-phase supplies
- Open dripproof enclosure resists moisture in plant environments
- Class F insulation with 1.15 service factor handles 40 °C ambient heat
Dayton 36VF35 2 HP HVAC Control
The Dayton 36VF35 is a three-phase general-purpose motor rated at 2 HP with a nameplate speed of 1165 rpm. It operates on 208-230/460 V at 60 Hz and draws 6.5-5.9/2.9 full-load amps. The unit uses a rigid-base horizontal mount and a 182/4T frame with a 1-1/8 inch keyed shaft.
Open driproof enclosure and Class F insulation
The open driproof enclosure allows airflow through the windings while resisting falling moisture, making it suited to clean indoor plant rooms. Class F insulation and a 1.15 service factor let the motor run continuously at up to 40 °C ambient without thermal protection. Ball bearings and rolled-steel construction support sustained duty cycles.
Replaces legacy 182/4T frame motors
This model drops into existing 182/4T footprints when a direct 2 HP replacement is required at 1165 rpm. The jump is worth it when the application demands 60 Hz three-phase power, CW/CCW rotation flexibility and a 14-3/4 inch overall length. It does not suit builds needing integrated thermal overloads or vertical mounting.
Highlights
- 2 HP motor delivers strong HVAC airflow
- 1165 rpm speed suits ventilation and cooling duties
- Dual-voltage 208-230/460 V fits common three-phase supplies
- Open dripproof enclosure resists moisture in plant environments
- Class F insulation with 1.15 service factor handles 40 °C ambient heat
Specifications
| Type | Temperature Controllers |
|---|
Questions about this item
How much heat does the 2 HP motor generate when running continuously at 1165 rpm in a 40 °C ambient?
The motor is rated for a maximum ambient temperature of 40 °C with Class F insulation and a 1.15 service factor, allowing sustained operation at full load without overheating.
What electrical supply and mounting hardware are required to install this 208-230/460 V three-phase motor?
A 60 Hz three-phase supply at 208-230 V or 460 V and a rigid horizontal base for the 182/4T frame are needed; the motor draws 6.5-5.9/2.9 full-load amps.
Will the 1-1/8 inch keyed shaft and CW/CCW rotation match my existing 182/4T frame coupling and fan direction?
The 1-1/8 inch diameter keyed shaft and reversible CW/CCW rotation are standard for the 182/4T frame, so existing couplings and airflow direction can be retained.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
