Dayton
Dayton 36GK92 Type J Thermocouple Probe 12 in
Type J thermocouple probe with grounded junction measures air, gas or liquid from -346 °F to 2,913 °F using a 12 in cable and standard plug
- ColorTransparent
- Grounded junction gives fast response in air gas liquid
- Type J range covers -346 °F to 2913 °F
- 12 inch probe reaches deep into process streams
- 1/4 inch and 1/8 inch MNPT threads fit common ports
- Standard plug connects directly to compatible instruments
Dayton 36GK92 Type J Thermocouple Probe
The Dayton 36GK92 is a Type J thermocouple probe built for measuring temperature in air, gas, or liquid applications. It features a grounded junction and a standard plug for direct connection to compatible instrumentation. The probe sheath measures 3/16 in by 12 in with a 12 in cable length. It operates from -346 Degrees to 2,913 Degrees F.
Suits technicians needing a grounded Type J sensor
This probe suits technicians who need a grounded Type J sensor with 1/4 in and 1/8 in MNPT process connections for direct installation. Buyers requiring an ungrounded junction for electrical isolation or a different thermocouple calibration such as Type K should look at other models. The fixed 12 in cable length may not reach distant panels without an extension wire.
Verify your instrument accepts Type J input
Before ordering, confirm that your meter, controller, or data logger accepts a Type J thermocouple input and mates with a standard plug. Ensure the 1/4 in or 1/8 in MNPT thread matches your process fitting and that the 3/16 in diameter probe fits the insertion point. Check that the -346 Degrees F to 2,913 Degrees F range covers your application limits.
Highlights
- Grounded junction gives fast response in air gas liquid
- Type J range covers -346 °F to 2913 °F
- 12 inch probe reaches deep into process streams
- 1/4 inch and 1/8 inch MNPT threads fit common ports
- Standard plug connects directly to compatible instruments
Specifications
| Brand | DAYTON |
|---|---|
| Color | Transparent |
Questions about this item
What thread size must my process fitting have to accept the 1/4 in MNPT connection on this probe?
The probe uses a 1/4 in MNPT thread, so the mating fitting must provide a matching 1/4 in FNPT port for a proper seal.
Can I connect this Type J probe to a controller that only accepts Type K inputs?
No, Type J and Type K thermocouples produce different millivolt curves; the controller must be configured for Type J to read correctly.
How can I verify the probe is reading accurately after installation?
Compare the probe reading against a calibrated reference thermometer at a known temperature within the -346 °F to 2,913 °F range.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
