We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 1/16 inch stainless steel wire rope coil 50 ft

Dayton

Dayton 33RG64 Wire Rope 50 ft 1/16 in 100 lb

SKU CH-JR5H-YT30D

50 ft of 1/16 in 304 stainless steel wire rope rated for a 100 lb working load and 500 lbf breaking strength

  • TypeWheelbarrows & Carts
  • 304 stainless steel resists corrosion for long outdoor life
  • 50 ft length covers large spans without splicing
  • 100 lb working load limit secures light loads safely
  • 500 lbf breaking strength adds a strong safety margin
  • 1 x 19 strand construction stays flexible for easy handling

Wire Rope for Lifting Applications

This Dayton wire rope is a 50 ft length of 1/16 in diameter cable designed for lifting tasks. It is made from 304 stainless steel with a 1 x 19 strand classification and an IWRC core. The rope has a working load limit of 100 lb and a breaking strength of 500 lbf. It comes plain and unlubricated with a silver finish.

Buyers Needing Coated or Lubricated Cable

This product suits users who require bare stainless steel rope for general lifting and rigging where a 100 lb working load limit is sufficient. It is not for buyers who need a vinyl-coated or lubricated cable for abrasion resistance or reduced friction. It is also unsuitable for applications demanding a higher working load limit or a larger diameter rope.

100 lb Working Load Limit Decides Suitability

The working load limit of 100 lb is the critical specification determining if this rope matches the intended load requirements. Users must verify that the maximum applied load does not exceed this limit. The 500 lbf breaking strength provides the safety factor reference for the design. The 1/16 in diameter and 50 ft length define the physical scope of the product.

Highlights

  • 304 stainless steel resists corrosion for long outdoor life
  • 50 ft length covers large spans without splicing
  • 100 lb working load limit secures light loads safely
  • 500 lbf breaking strength adds a strong safety margin
  • 1 x 19 strand construction stays flexible for easy handling

Specifications

BrandDAYTON
TypeWheelbarrows & Carts

Questions about this item

Does the 1 x 19 strand 304 stainless steel rope need periodic lubrication or replacement after heavy lifting cycles?

The rope is supplied unlubricated; apply a compatible wire-rope lubricant before first use and re-lubricate whenever the surface looks dry or after exposure to salt water to extend service life.

What load limit should I respect so the 1/16 in diameter cable does not stretch or deform during a long pull?

Stay at or below the 100 lb working load limit; the 500 lbf breaking strength is a safety margin, not a working figure.

Will the bare 304 stainless wire become too hot to handle if winched continuously under full load?

Friction heating is minimal at the rated 100 lb load; the metal stays near ambient temperature during normal sustained pulls.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.