We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton 33NT08 3/4 in fuel control nozzle, straight spout, nylon stainless steel Viton body, trigger guard and hanger included

Dayton

Dayton 33NT08 3/4 in Fuel Control Nozzle

SKU CH-KB3Q-FB42Q

3/4 inch manual fuel control nozzle for AdBlue, diesel emissions fluids, urea and water-based media, flow rate 23.8 gpm, max pressure 72.5 psi, includes hanger and trigger guard

  • Weight1.14
  • Manual operation with trigger guard for safe handling
  • 3/4 in inlet and outlet for standard DEF systems
  • Nylon, stainless steel and Viton resist chemical wear
  • 8 gpm flow rate speeds refuelling tasks
  • 5 psi max pressure suits Adblue and urea fluids

Fuel Control Nozzle for Water-Based Fluids

The Dayton 33NT08 is a straight-spout nozzle built for manual dispensing of AdBlue, diesel emissions fluids, urea, antifreeze and other water-based media. It suits workshops, fleet depots and agricultural sites that handle these liquids in bulk. The 3/4 inch inlet and outlet match common hose and reel fittings. A trigger guard and nozzle hanger are included for safer handling and tidy storage.

Check Inlet Size and Pressure Before Ordering

Verify that your supply hose or reel terminates in a 3/4 inch connection compatible with the nozzle inlet. The unit is rated to a maximum pressure of 72.5 psi, so confirm your pump or gravity feed does not exceed this limit. The nozzle is designed solely for water-based fluids; it must not be used with petroleum fuels, solvents or aggressive chemicals. Ensure the operating environment stays within the material compatibility range of nylon, stainless steel and Viton seals.

Nylon and Stainless Steel Construction With Viton

The body combines nylon and stainless steel for chemical resistance and durability, while Viton seals withstand repeated contact with urea-based fluids. At 4 23/32 inches long, the straight spout reaches into standard fill ports without excessive reach. A flow rate of 23.8 gpm allows rapid tank filling. The integrated trigger guard reduces accidental discharge, and the supplied hanger keeps the nozzle off the floor when not in use.

Highlights

  • Manual operation with trigger guard for safe handling
  • 3/4 in inlet and outlet for standard DEF systems
  • Nylon, stainless steel and Viton resist chemical wear
  • 8 gpm flow rate speeds refuelling tasks
  • 5 psi max pressure suits Adblue and urea fluids

Specifications

Weight1.14
BrandDAYTON

Questions about this item

What comes with the 33NT08 nozzle and do I need to buy a hanger separately?

The nozzle includes a nozzle hanger and a trigger guard so no separate hanger purchase is required.

Should I choose the 3/4 in inlet version for my AdBlue system?

Yes, the 3/4 in inlet matches standard AdBlue, diesel emissions fluid, urea and water-based media lines.

What does the 23.8 gpm flow rate mean when the nozzle is fitted to a 72.5 psi supply?

At the rated 72.5 psi maximum pressure the nozzle can deliver up to 23.8 gallons per minute of fluid.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.