Dayton 32V130 Handheld Air Mixer 5 to 10 Gallon

Handheld Air Mixer for 5 to 10 Gallon Tanks

The Dayton 32V130 is an air-powered handheld mixer designed for open containers holding five to ten gallons. It mounts on top and uses a fixed propeller on a twenty-and-a-half-inch stainless-steel shaft. A half-horsepower motor drives the blade up to one thousand RPM. The unit connects via a quarter-inch female NPT air inlet.

Suits Small-Batch Mixing Not Large Vessels

This mixer suits operators blending low-to-medium viscosity fluids in pails or small drums where a portable top-mount tool is preferred. The fixed five-inch blade and eleven-degree pitch angle provide consistent axial flow in the rated volume range. Builders who need a second impeller for higher shear or a longer shaft for deeper tanks should look at something else. The air motor requires a compressed-air supply at the point of use.

Half-Horsepower Air Motor Decides Fit

The maximum motor horsepower of one-half hp is the single specification that decides whether this is the right part. It sets the torque available at the shaft and therefore the maximum viscosity and batch size the mixer can turn at the rated one thousand RPM. If the application demands more torque than a half-horsepower air motor delivers, this unit will stall regardless of vessel size.