Dayton
Dayton 30G484 Potentiometer 30mm 1000 Ohms
Heavy-duty 30 mm potentiometer rated 1,000 ohms, 2 W, 500 V AC, NEMA 13 with 0 to 100 percent dial plate
- Heavy-duty 30 mm build suits industrial panels
- 1000 Ω resistance with 2 W rating for reliable control
- 500 V AC max voltage handles demanding circuits
- 4 mA max current ensures precise adjustment
- NEMA 13 enclosure resists oil, water and dust
Industrial Control Component
The Dayton 30G484 is a 30 mm heavy-duty potentiometer rated at 1000 Ohms and 2 W. It provides variable resistance for machinery and machine-shop equipment requiring manual adjustment of electrical parameters. The component carries a NEMA 13 rating and a 0 to 100 percent dial plate for clear position indication. It is built for new installations where reliable, panel-mounted control is specified.
Sustained Load Behaviour
Under continuous operation the device dissipates up to 2 W while maintaining its 1000 Ohm resistance value. The maximum voltage rating of 500V AC and 4 mA current limit define the safe operating envelope for extended duty cycles. The heavy-duty construction supports repeated adjustment without mechanical degradation. Performance remains stable within the published electrical limits during prolonged use.
Thermal Noise And Power Characteristics
The potentiometer operates silently with no moving parts that generate audible noise in normal use. Heat produced corresponds directly to the 2 W power dissipation at maximum load. No active cooling is required for the component itself. Power draw is determined by the external circuit up to the 4 mA maximum at 500V AC.
Highlights
- Heavy-duty 30 mm build suits industrial panels
- 1000 Ω resistance with 2 W rating for reliable control
- 500 V AC max voltage handles demanding circuits
- 4 mA max current ensures precise adjustment
- NEMA 13 enclosure resists oil, water and dust
Specifications
| Brand | DAYTON |
|---|
Questions about this item
How much heat does the 2 W potentiometer produce during continuous operation?
The potentiometer is rated for 2 W dissipation; actual heat rise depends on the voltage and current applied within the 500V AC and 4 mA limits.
What mounting hardware must I already have to install the 30 mm unit?
The 30 mm body requires a matching panel cut-out and suitable fastening hardware, which are not included with the potentiometer.
Will the NEMA 13, 4 rating let the potentiometer replace an older NEMA 1 component?
Yes, the NEMA 13, 4 enclosure rating meets or exceeds the protection of a NEMA 1 device for indoor dust and light splash environments.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
