Dayton
Dayton 30G320 Selector Switch/Contact Block 1NC/1NO 30mm
Selector switch contact block with 1NO/1NC configuration rated 10A at 600V AC/DC for 30mm operators
- 1NO/1NC contact form suits diverse control circuits
- 10 A at 600 V AC/DC handles demanding loads
- cRUus and CE markings confirm component compliance
- Momentary break-before-make action prevents overlap faults
- Fits 30 mm operators including 30G319 and 30G318
Selector Switch Contact Block
The Dayton 30G320 is a 30 mm contact block designed for industrial control panels and machinery. It provides one normally open and one normally closed contact for momentary selector switch operators. The unit carries a 10 A rating at 600 V AC or DC and meets NEMA A600/Q600 designations. It is suited for electricians and maintenance teams building or repairing starter circuits.
Installation and Compatibility
The block mounts on a 30 mm operator such as the 30G319 selector switch and uses a break-before-make action. Wiring follows standard terminal layout for 1NO/1NC configurations. A common issue is ordering the block without verifying the operator model, as it fits only listed compatible operators. The clear housing aids visual inspection of contact movement during testing.
Contact Rating Decides Fit
The 10 A at 600 V AC/DC rating with NEMA A600/Q600 designation is the single specification that determines whether this block matches the load requirements. Buyers needing higher current capacity or a different voltage class must select another part. The cRUus component recognition and CE marking confirm compliance for panel builds.
Highlights
- 1NO/1NC contact form suits diverse control circuits
- 10 A at 600 V AC/DC handles demanding loads
- cRUus and CE markings confirm component compliance
- Momentary break-before-make action prevents overlap faults
- Fits 30 mm operators including 30G319 and 30G318
Specifications
| Brand | DAYTON |
|---|
Questions about this item
How do I confirm the selector switch is operating correctly after installation?
Verify the momentary action returns to its default position and that the break-before-make sequence interrupts the circuit before closing the alternate path.
What components are included with the 30G320 and what must be sourced separately?
The contact block with 1NO/1NC configuration is supplied; the 30 mm operator and any mounting hardware are not included.
Which Dayton model should I select for a 10 A, 600 V AC/DC control circuit?
The 30G320 is rated 10 A at 600 V AC/DC with A600/Q600 designation and suits momentary operator applications.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
