Dayton
Dayton 30G319 Selector Switch Contact Block 1NO 30mm
Contact block with 1NO momentary action rated 10A at 600V for 30mm operators
- Rated for 10 A at 600 V AC/DC for reliable power switching
- 1 NO contact form provides simple on-state signalling in control circuits
- Momentary action returns automatically for push-to-operate applications
- 30 mm mounting fits standard panel cut-outs without adapters
- cRUus component recognised and CE marked for North American and European compliance
Contact Block for 30 mm Selector Switches
This Dayton 30G319 contact block provides a single normally open circuit for 30 mm selector switch operators. It is intended for control-panel builders and maintenance technicians who need to add or replace a momentary contact on compatible devices.
10 A at 600 V AC/DC with A600/Q600 Rating
The block carries a 10 A rating at 600 V AC or DC and meets NEMA A600/Q600 contact ratings. It is cRUus component recognised and CE marked, so it satisfies the electrical limits and safety standards defined for this form factor.
Verify Operator Compatibility and Wiring Needs
Confirm that the existing operator is a Dayton 30G319 or 30G320 type before ordering. Ensure the panel cut-out accepts a 30 mm mounting and that the control circuit requires a momentary 1NO action with green colour coding.
Highlights
- Rated for 10 A at 600 V AC/DC for reliable power switching
- 1 NO contact form provides simple on-state signalling in control circuits
- Momentary action returns automatically for push-to-operate applications
- 30 mm mounting fits standard panel cut-outs without adapters
- cRUus component recognised and CE marked for North American and European compliance
Specifications
| Brand | DAYTON |
|---|
Questions about this item
Should I choose the 30G319 or the 30G320 operator for this 1NO contact block?
This block is compatible with both the 30G319 and 30G320 operators, so select the operator that matches your required switching action.
What does the 10A at 600V AC/DC rating mean for my control circuit?
It means the contact can safely switch loads up to 10 amps at 600 volts in either AC or DC control circuits.
How does the NEMA A600/Q600 designation affect the contact block's capacity?
The A600 rating covers 10 amps at 600 volts AC for heavy pilot duty, while Q600 covers the same voltage at lower current for DC pilot duty.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
