Dayton
Dayton 30G312 Selector Switch 30mm 3-Position Black
A 30 mm three-position selector switch with momentary, maintained and momentary action, 10 A at 600 V AC rating, NEMA 13 and 4 protection, and IP65 sealing
- 3-position selector switch for versatile machine control
- 30 mm mounting diameter fits standard industrial panels
- IP65 rated for dust-tight and water-jet protection
- 10 A at 600 V AC contact rating handles heavy loads
- NEMA 13 and 4 enclosure ratings suit harsh environments
30 mm Three-Position Selector Switch
The Dayton 30G312 is a 30 mm panel-mounted selector switch with three positions and a black extended lever operator. It provides a 1NO/1NC contact form rated at 10A at 600V AC and 2.5A at 600V DC, suitable for industrial control circuits. The switch features a momentary/maintained/momentary action sequence across positions A, B and C. A zinc bezel with silver finish and plastic operator head complete the assembly.
Suited for Machine Control Panels
This switch fits panels requiring a 30 mm cut-out and NEMA 4, 13 or IP65 environmental protection. It is designed for operators who need a maintained centre position with momentary action on either side. Buyers needing illuminated operators, key-operated removal or a different contact configuration should consider other options. The Cam C switching sequence (XO/OO/OX) is fixed and not field-adjustable.
10 Amp AC Rating with IP65 Sealing
The contact block handles up to 10 amps at 600 volts AC, falling to 2.5 amps at the same DC voltage, covering typical motor starter and pilot duty loads. NEMA A600/Q600 designation confirms suitability for heavy-duty control circuits. IP65 and NEMA 4/13 ratings protect against dust, water jets and oil, but the device is not rated for submersion or hazardous locations.
Highlights
- 3-position selector switch for versatile machine control
- 30 mm mounting diameter fits standard industrial panels
- IP65 rated for dust-tight and water-jet protection
- 10 A at 600 V AC contact rating handles heavy loads
- NEMA 13 and 4 enclosure ratings suit harsh environments
Specifications
| Brand | DAYTON |
|---|
Questions about this item
What contact rating does the 30 mm selector switch need from the circuit it controls?
The switch is rated for 10A at 600V AC and 2.5A at 600V DC, matching NEMA A600/Q600 designation.
Will the IP65 rating protect the switch if mounted next to older NEMA 4 components?
Yes, the IP65 rating and NEMA 13/4 enclosure rating mean it withstands the same dust and water jets as legacy NEMA 4 devices.
How can I verify the momentary-maintained-momentary action after wiring?
Move the extended lever to position A and C for momentary return, and to position B where it stays maintained; the contact block shows XO, OO, OX operation respectively.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
