Dayton
Dayton 30G260 Selector Switch 22 mm 3 Position Lever
A 22 mm three-position lever selector switch with momentary-maintained-momentary action, 2NO contacts rated 10A at 600V AC, and IP65 protection
- 22 mm mounting fits standard panels
- Three-position lever offers momentary, maintained, momentary action
- 10 A at 600 V AC contact rating handles heavy loads
- IP65 and NEMA 4X ratings resist dust and water jets
- Plastic operator head and bezel provide durable, lightweight construction
22 mm Selector Switch for Industrial Control
This Dayton 30G260 selector switch mounts in a standard 22 mm panel cut-out and provides three lever positions for momentary or maintained operation. It is intended for machine builders and maintenance engineers who need a compact, panel-mounted control device for motor starters or contactor circuits. The lever operator gives clear tactile feedback in each position.
10 A AC Contact Rating with IP65 Sealing
The switch carries a 10 A rating at 600 V AC and 2.5 A at 600 V DC, suitable for pilot-duty control circuits in NEMA A600/Q600 applications. It is not designed for direct high-power load switching beyond these contact ratings. The IP65 and NEMA 4X ratings mean the operator withstands wash-down and dust ingress, but the contacts will wear under continuous high-cycle actuation.
Plastic Lever and Bezel with Two Normally Open
The operator head, bezel and basic housing are moulded plastic with a silver bezel and black lever, offering corrosion resistance in indoor or sheltered outdoor panels. Two normally open contacts change state at positions A and C while position B remains open, giving a momentary-maintained-momentary sequence. No cam is included, so the switch suits standard contact-block mounting without additional mechanical coding.
Highlights
- 22 mm mounting fits standard panels
- Three-position lever offers momentary, maintained, momentary action
- 10 A at 600 V AC contact rating handles heavy loads
- IP65 and NEMA 4X ratings resist dust and water jets
- Plastic operator head and bezel provide durable, lightweight construction
Specifications
| Brand | DAYTON |
|---|
Questions about this item
Will the 22 mm mounting cutout match the panels on my older control board?
The switch fits a standard 22 mm panel cutout, so it aligns with most legacy industrial panels that use that spacing.
How can I verify the lever action is functioning correctly once installed?
Move the lever through all three positions; the contacts should show momentary action at positions A and C and maintained action at position B, matching the X-O-X operation sequence.
Does the package include a cam or any mounting hardware, or must I source them separately?
No cam is included with the switch; mounting hardware for the 22 mm cutout is also not supplied and must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
